How to Replace Lower Control Arm 2005-10 Jeep Grand Cherokee
39.4 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00648
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2005-10 Jeep Grand Cherokee.
• Check here for more videos on the 2005-2010 Jeep Grand Cherokee Jeep Grand Cherokee 2005-2010 3rd Gen...
This process should be similar on the following vehicles:
2005 Jeep Grand Cherokee
2006 Jeep Grand Cherokee
2007 Jeep Grand Cherokee
2008 Jeep Grand Cherokee
2009 Jeep Grand Cherokee
2010 Jeep Grand Cherokee
Tools you will need:
• Pry Bar http://1aau.to/oP/1AXAA00020
• 18mm Socket http://1aau.to/o8/1AXAA00043
• 21mm Socket http://1aau.to/o8/1AXAA00043
• 22mm Socket http://1aau.to/or/1AXAA00266
• 24mm Socket
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/obn/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oay/1AXAA00044
• Floor Jack http://1aau.to/oR/1AXAA00068
• Hammer http://1aau.to/oL/1AXAA00091
• Jack Stands http://1aau.to/oS/1AXAA00065
• Wire Brush http://1aau.to/oq/1AXAA00079
Subscribe: @trq
Check out our playlist:
Jeep Grand Cherokee 2005-2010 3rd Generation (WK): Jeep Grand Cherokee 2005-2010 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00648
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2005-10 Jeep Grand Cherokee.
• Check here for more videos on the 2005-2010 Jeep Grand Cherokee Jeep Grand Cherokee 2005-2010 3rd Gen...
This process should be similar on the following vehicles:
2005 Jeep Grand Cherokee
2006 Jeep Grand Cherokee
2007 Jeep Grand Cherokee
2008 Jeep Grand Cherokee
2009 Jeep Grand Cherokee
2010 Jeep Grand Cherokee
Tools you will need:
• Pry Bar http://1aau.to/oP/1AXAA00020
• 18mm Socket http://1aau.to/o8/1AXAA00043
• 21mm Socket http://1aau.to/o8/1AXAA00043
• 22mm Socket http://1aau.to/or/1AXAA00266
• 24mm Socket
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/obn/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oay/1AXAA00044
• Floor Jack http://1aau.to/oR/1AXAA00068
• Hammer http://1aau.to/oL/1AXAA00091
• Jack Stands http://1aau.to/oS/1AXAA00065
• Wire Brush http://1aau.to/oq/1AXAA00079
Subscribe: @trq
Check out our playlist:
Jeep Grand Cherokee 2005-2010 3rd Generation (WK): Jeep Grand Cherokee 2005-2010 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/10/15 منتشر شده
است.
39,405
بـار بازدید شده