How to Replace Front Upper Control Arms with Ball Joint 2011-2021 Jeep Grand Cherokee
4.5 هزار بار بازدید -
2 ماه پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASFU00300
This video shows you how to install new front upper control arms with ball joint from TRQ on your 2011-2021 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
Estimated installation time for a professional technician is approximately: 5 hours 6 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obIW/1AXAA00013
• Pry Bar http://1aau.to/oaaN/1AXAA00020
• 21mm wrench
• 13mm Socket http://1aau.to/occB/1AXAA00015
• 18mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/ouj/1AXAA00266
• 23mm Socket
• Trim Tool Set http://1aau.to/oaAj/1AXXX00006
• Locking Pliers http://1aau.to/opn/1AXAA00139
• T50 Socket
• 1/2 Inch Breaker Bar http://1aau.to/or8/1AXAA00078
• Ratchet http://1aau.to/ocdE/1AXAA00016
• Socket Extensions http://1aau.to/occB/1AXAA00015
• Torque Wrench http://1aau.to/obfZ/1AXAA00044
• Bungee Cord
• Cloth Rags http://1aau.to/oQS/1AXSS00035
• Dielectric Grease
• Gloves http://1aau.to/obd8/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Bucket
• Floor Jack http://1aau.to/oaA7/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oanT/1AXAA00065
• Pole Jack
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASFU00300
This video shows you how to install new front upper control arms with ball joint from TRQ on your 2011-2021 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
Estimated installation time for a professional technician is approximately: 5 hours 6 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obIW/1AXAA00013
• Pry Bar http://1aau.to/oaaN/1AXAA00020
• 21mm wrench
• 13mm Socket http://1aau.to/occB/1AXAA00015
• 18mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/ouj/1AXAA00266
• 23mm Socket
• Trim Tool Set http://1aau.to/oaAj/1AXXX00006
• Locking Pliers http://1aau.to/opn/1AXAA00139
• T50 Socket
• 1/2 Inch Breaker Bar http://1aau.to/or8/1AXAA00078
• Ratchet http://1aau.to/ocdE/1AXAA00016
• Socket Extensions http://1aau.to/occB/1AXAA00015
• Torque Wrench http://1aau.to/obfZ/1AXAA00044
• Bungee Cord
• Cloth Rags http://1aau.to/oQS/1AXSS00035
• Dielectric Grease
• Gloves http://1aau.to/obd8/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Bucket
• Floor Jack http://1aau.to/oaA7/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oanT/1AXAA00065
• Pole Jack
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 ماه پیش
در تاریخ 1403/03/01 منتشر شده
است.
4,511
بـار بازدید شده