A damage model for tensile test in Abaqus

Hyper Lyceum
Hyper Lyceum
6.8 هزار بار بازدید - 4 سال پیش - In this video, you will
In this video, you will learn how to create a simple tensile test model by using damage criteria in Abaqus. Damage criteria help users to simulate the element deletion to study part failure. There are two factors that are necessary to define for damage model: part failure and element deletion. the first criteria are necessary to reduce the stiffness matrix in the element and the second one is necessary to remove the elements. an explicit model without mass scaling factor was used in this model. The video is short and you can learn this in less than 11 minutes. and you will have the output and Abaqus CAE file

If you need the CAE, JNL, and ... files please visit our website:
www.Hyperlyceum.com
Or the following link:
https://www.hyperlyceum.com/product/a...
If you like to learn more about increment time and step time you can watch this video:
https://hyperlyceum.com/product/incre...

You might like to learn more about the damage and explicit models in Abaqus:
An example for explicit model for damage
An example for explicit model for dam...
Explicit model for spring response
4 سال پیش در تاریخ 1399/03/04 منتشر شده است.
6,810 بـار بازدید شده
... بیشتر