Making a DIY CNC Metal Lathe | The Spindle | #2

This time I'm making the spindle for the DIY CNC metal lathe project. It will be driven by a 2.2kW AC motor by a 17mm V-belt. I used 3 UCF 207 bearing units and shaft collars for taking the axial forces on the bearings so the shaft doesn't move as the shaft holding screws wouldn't be enough. I hope you will enjoy the video.


Inspiration by
👉 @letslearnsomething30 - mechanical ideas
👉 HomeMade Lathe Part 1- spindle forces... - Dealing with axial forces idea
Check them out!

Part 1 [The Frame] : 👉 Making a DIY CNC Metal Lathe  | The F...
Part 2 [The Spindle]: 👉 Making a DIY CNC Metal Lathe  | The S...
Part 3 [The Tool Post]: 👉 Making a DIY CNC Metal Lathe  | The L...
Part 4 [The X and Z Axis]: 👉 Making a DIY CNC Metal Lathe  | The X...
Part 5 [The Control Box]: 👉 Making a DIY CNC Metal Lathe  | The C...


Subscribe and hit the like button if you like the video and want more!
If you have any questions - comment down below.
Thanks for watching!

00:00 Intro
00:28 Overview of the spindle
00:43 Cutting, welding, assembling
09:15 Outro and final result

Facebook Page      👉 Facebook: GBWMCNC
YouTube Channel  👉👉gbwmweldingmachiningcnc