How to Replace the Rear Shock Absorbers on a 2015 Toyota Sienna
13.2 هزار بار بازدید -
3 سال پیش
-
Easy to follow step-by-step guide
Easy to follow step-by-step guide on how to replace your rear shocks. If you have any questions, drop them in the comments below and I’ll get back to you.
Tools Used:
-Pry bar.
-3/8in impact gun.
-21mm socket
-19mm socket.
-6mm Allen (hex key) wrench.
-Two different 19mm wrench.
-17mm ratchet wrench.
-Two different sizes of flat tip screwdrivers.
Part Used:
-Rear shocks (Brand used: Monroe OESpectrum).
CLICK ON LINK TO PURCHASE ON AMAZON: https://amzn.to/3vfsNDu
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
Tools Used:
-Pry bar.
-3/8in impact gun.
-21mm socket
-19mm socket.
-6mm Allen (hex key) wrench.
-Two different 19mm wrench.
-17mm ratchet wrench.
-Two different sizes of flat tip screwdrivers.
Part Used:
-Rear shocks (Brand used: Monroe OESpectrum).
CLICK ON LINK TO PURCHASE ON AMAZON: https://amzn.to/3vfsNDu
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
3 سال پیش
در تاریخ 1400/03/22 منتشر شده
است.
13,241
بـار بازدید شده