DIY Crown Race Removal & Install - No Special Tools, Screwdriver, or Damage!
114 هزار بار بازدید -
4 سال پیش
-
Here is my first real
Here is my first real DIY tech tip video where I show you how to remove and install that pesky crown race with no special tools, such as a crown race removal or crown race setting tool. As I discuss in the video, this method uses razorblades and causes a lot less damage and marring that a screwdriver can cause. However, razorblades are sharp and can cause injury so just be dang careful! Also hitting metal on metal, such as a hammer on a razorblade can cause fragmenting, so wear safety glasses!
This method can seem tedious but really only took a couple minutes to remove the race and only cost me $2 for the blades.
Installation is even easier! just a $3.30 piece of 1.5" x 2' PVC pipe, and whack it on! Bam! Done! So easy!
Do you have a better way to do this as a DIYer? Let me know!
Thanks for watching and consider subscribing if you enjoyed what you saw!
0:00-1:15 Intro
1:16-2:39 Disclaimer and materials needed!
2:40-5:28 Removal of Crown Race
5:29-6:04 Installation of Crown Race
6:05 Summary and Outro
Looking to upgrade your bike? follow this link to pick up those parts and help support this channel!
www.worldwidecyclery.com/?aff=76
Follow me on:
Instagram: TkolboMTB or www.instagram.com/tkolbomtb/
Strava: www.strava.com/athletes/456708
4 سال پیش
در تاریخ 1399/10/04 منتشر شده
است.
114,034
بـار بازدید شده