BMW EGR Valve Stainless Steel Removal Bypass Delete Blanking Kit
168.1 هزار بار بازدید -
8 سال پیش
-
Please note we no longer
Please note we no longer sell this product. This video is kept online for information purposes only.
The Problem
Carbon rich recirculated exhaust gasses leave deposits within the EGR valve which restrict or damage the EGR valve causing vehicle faults.
The EGR valve on these vehicles is designed to redirect a portion of the vehicles exhaust gases back to the engine through the intake manifold. Carbon rich recirculated exhaust gasses enter the EGR valve before the intake manifold, over time Carbon deposits gather in the EGR valve and can interfere with the operation of the EGR valve flap and can block air flow. Resulting in reduced fuel economy and vehicle performance. Often this build up damages the EGR valves which are expensive to replace. This malfunction of the valve or blocking of the exhaust port causes Detonation (also known as pinging or spark knock) causing misfiring or rough idle. Many examples can be found across the internet showing these EGRs completely blocked up with carbon; significantly reducing airflow to the intake.
Symptoms of the fault
Rough engine running
Misfiring
Decreased throttle response
Loss of power or torque
Smokey engine
Low MPG / decreased MPG
Vehicle stalling at low speeds
Acceleration slow / sluggish
Vehicles affected and compatibility
BMW engines M47 M47N M57 M47N2 M67 M47R
3 series E46
318d 2001-2005
318td 2002-2004
320d 1997- 2005
320cd 2003- 2006
320td 2000-2004
330d 1998-2003
330xd 2000-2003
5 series E39
520d 1999-2003
525d 1999-2003
530d 1997-2003
X5 E53
3.0d 2000-2003
X3 E83
2.0d 2003-2006
E38 7 Series
730d 1997-2001
740d 1998-2001
E65 7 Series
740d 2001-2005
Rover 75 MG ZT 2001-2005
Land Rover Freelander TD4 2001-2006
Land Rover Range Rover TD6 2002-2006
This item is not compatible with quick release style hoses.
Vehicles which utilise a vacuum operated EGR will not show a fault code when replaced with our EGR blank. Vehicles with an electronically operated EGR will show a fault code which will need to be mapped out. This is the same for all suppliers of EGR blanks whether stated or not.
This item is for diesel vehicles only not for petrol vehicles.
Associated part numbers:
11717785452, 11717804378, 7785452, 7804378, 11717793484, LR005791, WAV000040, 7.28138.00.0, 7.28138.02.0, 7.28264.00.0, 7.28264.06.0, 555229, 14406, 14433, EGR251, EGR258, ERV190, ERV208, Pierburg.
Part numbers are for guidance only, please inspect your EGR to ensure you are purchasing the correct blank.
Our solution
Our kit allows easy replacement of the EGR valve with our improved design part which stops any recirculated exhaust gases entering the intake manifold. Resolving vehicle faults and stopping carbon build ups in future.
Install our completely Stainless Steel EGR blank and eliminate build up in the intake manifold. This allows the engine to breath better which can improve vehicle performance and fuel efficiency. Our EGR blanking kit stops these recirculated exhaust gases entering the intake manifold, eliminating the risk of future build ups.
Our kit is the most comprehensive available including all components required to delete the EGR valve and will fit in the same way as the OEM part. You will receive:
1x Stainless steel EGR tube, precision machined and all constructed from stainless steel, featuring a substantial bead to ensure an air tight seal with the intercooler hose.
4x Stainless steel EGR to intake manifold bolts.
1x Intake manifold to EGR rubber gasket.
1X vacuum pipe blanking plug with cable tie to secure.
2x Stainless steel EGR cooler blanks to allow you to blank off the EGR cooler if installed on your vehicle.
1X Exhaust manifold blank with Cemjo high temperature gasket and fasteners allowing you to remove the EGR to Exhaust manifold flexible tube that often blocks or splits.
Our kit is top of the range and the most comprehensive kit available. Check out our instructions and video to see how our kit allows you to successfully eliminate the EGR valve on your vehicle.
Possible advantages of EGR deleting:
Turbo can spool up quicker and at lower revs resulting in less turbo lag.
Prevents carbon build-up inside intake manifold and ports.
Smoother pick up from idle, engine running and better fuel economy.
Increases in power and / or torque which slowly fades as carbon builds up.
Improved fuel consumption / MPG.
You will receive
1x Stainless steel EGR delete tube
4x Stainless steel EGR delete tube mounting bolts
1x Stainless steel exhaust manifold to egr pipe blank
1x High temp CEMJO exhaust manifold blank gasket
2X Exhaust manifold blank bolts with locking washers
2X Stainless steel EGR cooler blanking plates
1X Intake manifold to EGR gasket
1X Vacuum tube plug with cable tie
The Problem
Carbon rich recirculated exhaust gasses leave deposits within the EGR valve which restrict or damage the EGR valve causing vehicle faults.
The EGR valve on these vehicles is designed to redirect a portion of the vehicles exhaust gases back to the engine through the intake manifold. Carbon rich recirculated exhaust gasses enter the EGR valve before the intake manifold, over time Carbon deposits gather in the EGR valve and can interfere with the operation of the EGR valve flap and can block air flow. Resulting in reduced fuel economy and vehicle performance. Often this build up damages the EGR valves which are expensive to replace. This malfunction of the valve or blocking of the exhaust port causes Detonation (also known as pinging or spark knock) causing misfiring or rough idle. Many examples can be found across the internet showing these EGRs completely blocked up with carbon; significantly reducing airflow to the intake.
Symptoms of the fault
Rough engine running
Misfiring
Decreased throttle response
Loss of power or torque
Smokey engine
Low MPG / decreased MPG
Vehicle stalling at low speeds
Acceleration slow / sluggish
Vehicles affected and compatibility
BMW engines M47 M47N M57 M47N2 M67 M47R
3 series E46
318d 2001-2005
318td 2002-2004
320d 1997- 2005
320cd 2003- 2006
320td 2000-2004
330d 1998-2003
330xd 2000-2003
5 series E39
520d 1999-2003
525d 1999-2003
530d 1997-2003
X5 E53
3.0d 2000-2003
X3 E83
2.0d 2003-2006
E38 7 Series
730d 1997-2001
740d 1998-2001
E65 7 Series
740d 2001-2005
Rover 75 MG ZT 2001-2005
Land Rover Freelander TD4 2001-2006
Land Rover Range Rover TD6 2002-2006
This item is not compatible with quick release style hoses.
Vehicles which utilise a vacuum operated EGR will not show a fault code when replaced with our EGR blank. Vehicles with an electronically operated EGR will show a fault code which will need to be mapped out. This is the same for all suppliers of EGR blanks whether stated or not.
This item is for diesel vehicles only not for petrol vehicles.
Associated part numbers:
11717785452, 11717804378, 7785452, 7804378, 11717793484, LR005791, WAV000040, 7.28138.00.0, 7.28138.02.0, 7.28264.00.0, 7.28264.06.0, 555229, 14406, 14433, EGR251, EGR258, ERV190, ERV208, Pierburg.
Part numbers are for guidance only, please inspect your EGR to ensure you are purchasing the correct blank.
Our solution
Our kit allows easy replacement of the EGR valve with our improved design part which stops any recirculated exhaust gases entering the intake manifold. Resolving vehicle faults and stopping carbon build ups in future.
Install our completely Stainless Steel EGR blank and eliminate build up in the intake manifold. This allows the engine to breath better which can improve vehicle performance and fuel efficiency. Our EGR blanking kit stops these recirculated exhaust gases entering the intake manifold, eliminating the risk of future build ups.
Our kit is the most comprehensive available including all components required to delete the EGR valve and will fit in the same way as the OEM part. You will receive:
1x Stainless steel EGR tube, precision machined and all constructed from stainless steel, featuring a substantial bead to ensure an air tight seal with the intercooler hose.
4x Stainless steel EGR to intake manifold bolts.
1x Intake manifold to EGR rubber gasket.
1X vacuum pipe blanking plug with cable tie to secure.
2x Stainless steel EGR cooler blanks to allow you to blank off the EGR cooler if installed on your vehicle.
1X Exhaust manifold blank with Cemjo high temperature gasket and fasteners allowing you to remove the EGR to Exhaust manifold flexible tube that often blocks or splits.
Our kit is top of the range and the most comprehensive kit available. Check out our instructions and video to see how our kit allows you to successfully eliminate the EGR valve on your vehicle.
Possible advantages of EGR deleting:
Turbo can spool up quicker and at lower revs resulting in less turbo lag.
Prevents carbon build-up inside intake manifold and ports.
Smoother pick up from idle, engine running and better fuel economy.
Increases in power and / or torque which slowly fades as carbon builds up.
Improved fuel consumption / MPG.
You will receive
1x Stainless steel EGR delete tube
4x Stainless steel EGR delete tube mounting bolts
1x Stainless steel exhaust manifold to egr pipe blank
1x High temp CEMJO exhaust manifold blank gasket
2X Exhaust manifold blank bolts with locking washers
2X Stainless steel EGR cooler blanking plates
1X Intake manifold to EGR gasket
1X Vacuum tube plug with cable tie
8 سال پیش
در تاریخ 1395/08/18 منتشر شده
است.
168,193
بـار بازدید شده