Lapping and Checking Valves (EASY WAY)
940 هزار بار بازدید -
8 سال پیش
-
Just lapping some valvesUpdate: Since
Just lapping some valves
Update: Since of this video's release to 12/25/17, the engine has no major problem. The engine is used to drive around 30 miles a day, and yes, I know that too much Prussian blue was used.
Tools Used:
Drill/Driver
hex to 1/4 drive
Lisle 21200 Valve Lapper
CTA Fine/Coarse Lapping Compound
Permatex Prussian Blue
Dykem Steel Blue Layout Fluid
Digital Caliper
Note: A proper valve job is recommended to be done by a professional in a machine shop. I did this because this engine is not worth much and it is not a high performance engine. (LOW BUDGET)
Update: Since of this video's release to 12/25/17, the engine has no major problem. The engine is used to drive around 30 miles a day, and yes, I know that too much Prussian blue was used.
Tools Used:
Drill/Driver
hex to 1/4 drive
Lisle 21200 Valve Lapper
CTA Fine/Coarse Lapping Compound
Permatex Prussian Blue
Dykem Steel Blue Layout Fluid
Digital Caliper
Note: A proper valve job is recommended to be done by a professional in a machine shop. I did this because this engine is not worth much and it is not a high performance engine. (LOW BUDGET)
8 سال پیش
در تاریخ 1395/07/05 منتشر شده
است.
940,074
بـار بازدید شده