How To Replace Rear Shocks 2004-10 Toyota Sienna
27.9 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Shock Absorber from
Buy Now!
New Shock Absorber from 1AAuto.com http://1aau.to/ia/KYSHA00170
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2004-10 Toyota Sienna.
• Check here for more videos on the 2004-2010 Toyota Sienna: Toyota Sienna 2004-2010 2nd Generation
This process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna
Tools you will need:
• 17mm Wrench http://1aau.to/oa/1AXAA00010
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Silicone Spray
• 6mm Allen Wrench http://1aau.to/oa/1AXAA00007
• Jack Stands http://1aau.to/oa/1AXAA00065
Subscribe: @trq
Check out our playlist:
Toyota Sienna 2004-2010 2nd Generation: Toyota Sienna 2004-2010 2nd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Shock Absorber from 1AAuto.com http://1aau.to/ia/KYSHA00170
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2004-10 Toyota Sienna.
• Check here for more videos on the 2004-2010 Toyota Sienna: Toyota Sienna 2004-2010 2nd Generation
This process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna
Tools you will need:
• 17mm Wrench http://1aau.to/oa/1AXAA00010
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Silicone Spray
• 6mm Allen Wrench http://1aau.to/oa/1AXAA00007
• Jack Stands http://1aau.to/oa/1AXAA00065
Subscribe: @trq
Check out our playlist:
Toyota Sienna 2004-2010 2nd Generation: Toyota Sienna 2004-2010 2nd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/07/19 منتشر شده
است.
27,972
بـار بازدید شده