PART 1 - Seismic Design Provisions of ASCE 7-22

SKGAssociates منتشر شده در تاریخ 1403/06/13

93 بار بازدید - 2 هفته پیش -

skghoshassociates.com/ For the full recording: shop.skghoshassociates.com/web-seminar-recordings/… ASCE 7-22 is adopted by the 2024 IBC, which will be published later this year. The changes from ASCE 7-16 to ASCE 7-22 are so numerous and so substantive that learning about them needs to start now. The chapter on flood loads is the only chapter that has escaped any change. There are huge changes in snow load, ice load, and tsunami load provisions. There is a whole new chapter (32) on tornado loads. Risk Category III or IV structures located in the tornado-prone region shown in a figure are required to be designed and constructed to resist the greater of the tornado loads determined in accordance with Chapter 32 or the wind loads determined in accordance with Chapters 26 through 31. The changes in Chapters 11-23 on earthquake loads and Chapters 26-31 on wind loads are many and many of the seismic changes mark significant departures from past practice. ASCE 7-22 load combinations and importance factors are also quite different because of changes in the loads chapters. This four-part webinar focuses on the seismic design provisions (Chapters 11 through 23) of ASCE 7-22 and will introduce the major changes to attendees, will explain the changes and discuss their impact. Part 1: Chapter 11: Seismic Design Criteria Part 2: Chapter 12: Seismic Design Buildings Part 3: Chapter 13: Seismic Design of Nonstructural Components Part 4: Chapter 14 - 15: Seismic Design of Nonbuilding Structures and Material Specific Requirements For the full recording: shop.skghoshassociates.com/web-seminar-recordings/…

2 هفته پیش در تاریخ 1403/06/13 منتشر شده است.

93 بـار بازدید شده

... بیشتر