Forward and reverse motor control complete wiring for three phase motor

This video shows a complete, easy to follow tutorial on  how to wire a "FORWARD AND REVERSE MOTOR STARTER", from beginning to end.

One important thing to note when wiring forward and reverse motor control is to ensure a means of interlocking the two contactors, so that both contactors will not close at the same time. this is important because, the reversal is achieved by interchanging two lines at the out put of the contactor and if both contactors close at the same time, there will be a short circuit between the reversed lines.

There are two ways of providing the interlock: Mechanical and Electrical.
In this video,  Electrical interlock is used.  

I hope this video will be beneficial to electrical engineers, technicians,  electrical trainees and many others.

How to build automatic changeover switch: AUTOMATIC TRANSFER SWITCH
Automatic changeover switch Part2. AUTOMATIC TRANSFER SWITCH 3phase Comp...
STAR DELTA CONNECTION
Star-delta starter |Complete wiring o...
HOW TO WIRE AN 8PIN TIMER FOR |"ON DE...
HOW TO WIRE A TIMER TO A CONTACTOR
How to interlock two contactors | Com...
how to connect 3phase motor in star o...
Complete wiring | Automatic changeove...
AUTOMATIC TRANSFER SWITCH 3phase Comp...
3phase motor winding connection at th...
How to check for open circuit in elec...
#1 Contactors explained | How contact...
AUTOMATIC TRANSFER SWITCH
#1 Direct-on-line Well Explained. | p...
#2 Direct-on-line control circuit Wel...
OVERLOAD RELAY CONNECTION EXPLAINED

@obloni_electrical

• #education
• #reverse_and_forward_starter
• #forward_and_reverse_starter
• #forward_and_reverse_motor_control
• #forward_and_reverse_control_starter
• #forward_and_reverse_motor_control_complete_wiring
• #how_to_wire_forward_and_reverse_motor_starter
• #wiring_of_forward_and_reverse_starter
• #practical_wiring_of_forward_and_reverse_motor_starter
• #reverse_and_forward_starter_wiring
• #motor_starter
• #forward_reverse_starter
• #reverse_forward_starter