Cadillac CTS Third Brake Light Common DIY Fixes - 2008 to 2013

How to fix and diagnose a non-working third brake light on the Cadillac CTS V6 3.0L or V6 3.6L or V8, including the CTS-V. The third brake light commonly fails. The problem and the fix isn't always what it seems. The LED replacement fixture is costly to replace, so you want to be 100% certain that it has failed before you buy a replacement. A new after market LED replacement is over $200 and the GM part is considerably more. In this video, I cover the most common faults and the fix was surprising cheap and simple DIY that anyone can do. The third brake light is also commonly referred to as a high level brake light, or safety brake lamp, or center high mount stop lamp. Video applicable to all Cadillac CTS years (2008, 2009, 2010, 2011, 2012, 2013). Tools Required: - 7MM wrench or socket - long flat screw driver - micro flat screw driver - trim removal kit - crimp tool (optional) - Best solution to the fix shown in the video - wire butt connectors (optional) - Best solution to the fix shown in the video Car shown: 2011 Cadillac CTS4 with the V6 3.0L engine. Cadillac DIY Handy Val Playlist:    • CADILLAC Handy Val Playlist   Please see my other Cadillac videos on my Handy Val channel for other informative and easy to follow automobile how-to videos, including filter changes, battery changes, key fobs, and how to save on gas and others. Disclaimer - The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for professional advice. I do my best to provide accurate and complete information, however, I assume no liability for any property or personal damage that may arise from any of the information contained in this video. Due to factors beyond the control of Handy Val, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Handy Val always recommends safe practices.