How to Replace High Mount Third Brake Light 2006-2011 Cadillac DTS

TRQ
TRQ
13.5 هزار بار بازدید - 2 سال پیش - Buy Now! New High Mount
Buy Now! New High Mount Third Brake Light from 1AAuto.com 1aau.to/ia/GMLTL00004 This video shows you how to replace the high mount third brake light on your 2006-2011 Cadillac DTS. The third brake light is just as important as your other tail lights. In many cases, a broken or burnt out third brake light alone can fail a safety inspection. Avoid problems and increase safety by replacing your third brake light assembly with one from TRQ designed to fit your specific vehicle. This process should be similar on the following vehicles: 2006 Cadillac DTS 2007 Cadillac DTS 2008 Cadillac DTS 2009 Cadillac DTS 2010 Cadillac DTS 2011 Cadillac DTS Tools you will need: • Flat Blade Screwdriver 1aau.to/oa/1AXAA00013 • 10mm Socket 1aau.to/oa/1AXAA00017 • Trim Tool Set 1aau.to/oa/1AXXX00004 • Push Pin Pliers • Ratchet 1aau.to/oa/1AXAA00016 Subscribe:    / @trq   Check out our playlist: Cadillac DTS 2006-2011 1st Generation:    • Cadillac DTS 2006-2011 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش در تاریخ 1401/02/06 منتشر شده است.
13,542 بـار بازدید شده
... بیشتر