MPCNC Lowrider part 3 - Router, spoil board and cutting stuff!
136.2 هزار بار بازدید -
5 سال پیش
-
An enormous, easy to pack
An enormous, easy to pack away CNC machine that is largely 3D printed? Meet the V1 Engineering Lowrider2! In part 1 I made the parts and assembled the frame. In part 2, I setup with an SKR V1.3 mainboard, TMC5160 silent steppers, dual endstop self squaring firmware and a customised MKS TFT touchscreen.
In this instalment, I make a custom mount for my trimmer router, manufacture a cheap but effective spoil board and clamps, and then cut some timber, acrylic and aluminium in three different styles.
This guide focuses on Kiri-moto, a free cloud based CAM program that I find quick and easy to use for light duty milling like this. You can use whatever program you are comfortable with as the principles are the same.
Key message here: The lowrider2 is awesome but don't hold it back with a cordless router.
Kiri-moto free CAM software: https://grid.space/kiri?sm:CAM
Printable clamp (I did double size): https://www.thingiverse.com/thing:242...
Printable clamp (recommended): https://www.thingiverse.com/thing:367...
Milling basics V1 engineering page: https://www.v1engineering.com/milling...
Milling feeds and speeds guide: http://www.harveytool.com/cms/General...
DXF to SVG converter: https://convertio.co/dxf-svg/
Lithophane creator: http://3dp.rocks/lithophane/
Melamine for spoil board: https://www.bunnings.com.au/custompin...
Screw in thread fittings for spoil board (make sure they are a few mm thinner than the board): https://www.bunnings.com.au/taskmaste...
Ryobi trimmer router I used (cordless not recommended!): https://www.bunnings.com.au/ryobi-one...
Previous videos that might assist:
Lowrider2 MPCNC part 1: 3D Print your own CNC - MPCNC Lowride...
Lowrider2 MPCNC part 2: MPCNC Lowrider part 2 - belts, wiring...
SKR V1.3 comprehensive guide: SKR V1.3 Comprehensive guide - 32bit ...
TMC5160 guide: TMC2209 and TMC 5160: Guide for MKS G...
MKS TFT28 guide: MKS TFT28 touch screen on the Ender 3
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: Patreon: teachingtech
#mpcnc #lowrider2 #3dprinting
In this instalment, I make a custom mount for my trimmer router, manufacture a cheap but effective spoil board and clamps, and then cut some timber, acrylic and aluminium in three different styles.
This guide focuses on Kiri-moto, a free cloud based CAM program that I find quick and easy to use for light duty milling like this. You can use whatever program you are comfortable with as the principles are the same.
Key message here: The lowrider2 is awesome but don't hold it back with a cordless router.
Kiri-moto free CAM software: https://grid.space/kiri?sm:CAM
Printable clamp (I did double size): https://www.thingiverse.com/thing:242...
Printable clamp (recommended): https://www.thingiverse.com/thing:367...
Milling basics V1 engineering page: https://www.v1engineering.com/milling...
Milling feeds and speeds guide: http://www.harveytool.com/cms/General...
DXF to SVG converter: https://convertio.co/dxf-svg/
Lithophane creator: http://3dp.rocks/lithophane/
Melamine for spoil board: https://www.bunnings.com.au/custompin...
Screw in thread fittings for spoil board (make sure they are a few mm thinner than the board): https://www.bunnings.com.au/taskmaste...
Ryobi trimmer router I used (cordless not recommended!): https://www.bunnings.com.au/ryobi-one...
Previous videos that might assist:
Lowrider2 MPCNC part 1: 3D Print your own CNC - MPCNC Lowride...
Lowrider2 MPCNC part 2: MPCNC Lowrider part 2 - belts, wiring...
SKR V1.3 comprehensive guide: SKR V1.3 Comprehensive guide - 32bit ...
TMC5160 guide: TMC2209 and TMC 5160: Guide for MKS G...
MKS TFT28 guide: MKS TFT28 touch screen on the Ender 3
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: Patreon: teachingtech
#mpcnc #lowrider2 #3dprinting
5 سال پیش
در تاریخ 1398/05/13 منتشر شده
است.
136,227
بـار بازدید شده