Engineering an Automatic CNC Dust-Shoe
392.3 هزار بار بازدید -
3 سال پیش
-
I'm not happy with the
I'm not happy with the dust-shoe that came with my CNC router. So I engineered a much better one. Maybe I went a bit too far because I made it fully automatic and implemented many useful features. The whole thing is a huge project and by no means straightforward. In this video, I take you through the whole process and show every step I went through for tackling this project. In hindsight, I also think about this as an engineering project on easy mode. The reasons for that I explain in the video. I hope you enjoy
Drag chain files: https://www.thingiverse.com/thing:488...
Interested in the router bits I used for this project?
*Spoilboard Surfacing Cutter: https://www.fraisertools.com/en/spoil...
*Spiral Upcut bits: https://www.fraisertools.com/en/alpha...
*Spiral Downcut bits: https://www.fraisertools.com/en/alpha...
*Compression/ Nesting bits: https://www.fraisertools.com/en/delta...
*Spiral Upcut roughing bits (with chip breaker): https://www.fraisertools.com/en/charl...
*Conical Spiral Upcut ballnose bits: https://www.fraisertools.com/en/zeta-...
*Spiral Upcut ball nose bits: https://www.fraisertools.com/en/omega...
*Bit set: https://www.fraisertools.com/en/boss-...
Content:
0:00 Introduction
1:10 Why?
5:48 Design
7:43 Manufacturing
9:08 Assembly
23:05 Making the Brush
27:48 Electronics
32:16 First Movement
32:45 Setup and Clearance
34:40 Air Nozzle
36:27 Testing
38:37 Conclusion
Support me here: https://www.patreon.com/mariushornber...
or support me through my Amazon wishlist: https://amzn.to/2QoQbhw
Follow me on Instagram: Instagram: marius.hornberger
Enjoy the video!
Drag chain files: https://www.thingiverse.com/thing:488...
Interested in the router bits I used for this project?
*Spoilboard Surfacing Cutter: https://www.fraisertools.com/en/spoil...
*Spiral Upcut bits: https://www.fraisertools.com/en/alpha...
*Spiral Downcut bits: https://www.fraisertools.com/en/alpha...
*Compression/ Nesting bits: https://www.fraisertools.com/en/delta...
*Spiral Upcut roughing bits (with chip breaker): https://www.fraisertools.com/en/charl...
*Conical Spiral Upcut ballnose bits: https://www.fraisertools.com/en/zeta-...
*Spiral Upcut ball nose bits: https://www.fraisertools.com/en/omega...
*Bit set: https://www.fraisertools.com/en/boss-...
Content:
0:00 Introduction
1:10 Why?
5:48 Design
7:43 Manufacturing
9:08 Assembly
23:05 Making the Brush
27:48 Electronics
32:16 First Movement
32:45 Setup and Clearance
34:40 Air Nozzle
36:27 Testing
38:37 Conclusion
Support me here: https://www.patreon.com/mariushornber...
or support me through my Amazon wishlist: https://amzn.to/2QoQbhw
Follow me on Instagram: Instagram: marius.hornberger
Enjoy the video!
3 سال پیش
در تاریخ 1400/03/21 منتشر شده
است.
392,390
بـار بازدید شده