How to Replace Front Control Arms 2008-16 Chrysler Town & Country
69.1 هزار بار بازدید -
4 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK01765
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ lower control arm in your 2008-16 Chrysler Town & Country.
• Check here for more videos on the 2008-16 Chrysler Town & Country Chrysler Town & Country 2008-16 5th Gen
This process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 21mm wrench
• 24mm Wrench
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 32mm Socket http://1aau.to/oa/1AAST00003
• Blowtorch
• Brake Caliper Hanger http://1aau.to/oa/1AXAA00084
• Pickle Fork
• Locking Pliers http://1aau.to/oa/1AXAA00139
• Straight Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Cotter Pin
• Liquid Thread Locker
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Hammer http://1aau.to/oa/1AXAA00091
• Sledge Hammer http://1aau.to/oa/1AXAA00091
Subscribe: @trq
Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen: Chrysler Town & Country 2008-16 5th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK01765
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ lower control arm in your 2008-16 Chrysler Town & Country.
• Check here for more videos on the 2008-16 Chrysler Town & Country Chrysler Town & Country 2008-16 5th Gen
This process should be similar on the following vehicles:
2008 Chrysler Town & Country
2009 Chrysler Town & Country
2010 Chrysler Town & Country
2011 Chrysler Town & Country
2012 Chrysler Town & Country
2013 Chrysler Town & Country
2014 Chrysler Town & Country
2015 Chrysler Town & Country
2016 Chrysler Town & Country
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 21mm wrench
• 24mm Wrench
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 32mm Socket http://1aau.to/oa/1AAST00003
• Blowtorch
• Brake Caliper Hanger http://1aau.to/oa/1AXAA00084
• Pickle Fork
• Locking Pliers http://1aau.to/oa/1AXAA00139
• Straight Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Cotter Pin
• Liquid Thread Locker
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Hammer http://1aau.to/oa/1AXAA00091
• Sledge Hammer http://1aau.to/oa/1AXAA00091
Subscribe: @trq
Check out our playlist:
Chrysler Town & Country 2008-16 5th Gen: Chrysler Town & Country 2008-16 5th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
- #autos_vehicles
- #how_to_replace_lower_control_arm_chrysler_town_country
- #how_to_install_lower_control_arm_chrysler_town_country
- #how_to_remove_lower_control_arm_chrysler_town_country
- #how_to_replace_lower_control_arm_5th_gen_chrysler_town_country
- #5th_gen_chrysler_town_country_lower_control_arm
- #chrysler_town_country_lower_control_arm
4 سال پیش
در تاریخ 1398/11/16 منتشر شده
است.
69,165
بـار بازدید شده