How to Replace Front Lower Control Arms 2013-2016 Dodge Dart
9.9 هزار بار بازدید -
6 ماه پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00923
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2013-2016 Dodge Dart. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2013 Dodge Dart
2014 Dodge Dart
2015 Dodge Dart
2016 Dodge Dart
Tools you will need:
• Phillips Head Screwdriver http://1aau.to/obBw/1AXAA00013
• Pry Bar http://1aau.to/o5g/1AXAA00020
• 18mm Wrench
• 10mm Socket http://1aau.to/oby7/1AXAA00017
• 15mm Socket http://1aau.to/obVW/1AXAA00015
• 16mm Socket http://1aau.to/obVW/1AXAA00015
• 19mm Socket http://1aau.to/oayn/1AXAA00043
• 8mm Socket http://1aau.to/oby7/1AXAA00017
• Torque Angle Gauge
• E14 Socket
• E18 Inverted Torx Socket
• E20 Inverted Torx Socket
• Ratchet http://1aau.to/obYW/1AXAA00016
• Torque Wrench http://1aau.to/oa3u/1AXAA00044
• Gloves http://1aau.to/oaNG/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaqs/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oacG/1AXAA00065
• Pole Jack
• Rubber Mallet
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00923
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2013-2016 Dodge Dart. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2013 Dodge Dart
2014 Dodge Dart
2015 Dodge Dart
2016 Dodge Dart
Tools you will need:
• Phillips Head Screwdriver http://1aau.to/obBw/1AXAA00013
• Pry Bar http://1aau.to/o5g/1AXAA00020
• 18mm Wrench
• 10mm Socket http://1aau.to/oby7/1AXAA00017
• 15mm Socket http://1aau.to/obVW/1AXAA00015
• 16mm Socket http://1aau.to/obVW/1AXAA00015
• 19mm Socket http://1aau.to/oayn/1AXAA00043
• 8mm Socket http://1aau.to/oby7/1AXAA00017
• Torque Angle Gauge
• E14 Socket
• E18 Inverted Torx Socket
• E20 Inverted Torx Socket
• Ratchet http://1aau.to/obYW/1AXAA00016
• Torque Wrench http://1aau.to/oa3u/1AXAA00044
• Gloves http://1aau.to/oaNG/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaqs/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oacG/1AXAA00065
• Pole Jack
• Rubber Mallet
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
6 ماه پیش
در تاریخ 1402/11/25 منتشر شده
است.
9,911
بـار بازدید شده