mechDOG (DIY robot dog based on Arduino and LSS): turnings
5.3 هزار بار بازدید -
4 سال پیش
-
Turning gait of my new
Turning gait of my new DIY robot dog (aka mechDOG). It is based on Arduino and the new Lynxmotion Smart Servos. The chassis was handcrafted with aluminum and there are other parts also handcrafted with high impact polystyrene. The legs are completely made with brackets from the new Lynxmotion Servo Erector Set (SES V2).
Each leg has 3x ST1 servos (Lynxmotion Smart Servos) and they are controlled by an Arduino Uno and a Lynxmotion LSS Adapter Board.
LSS ST1 servos: https://www.robotshop.com/en/lynxmoti...
LSS Adapter Board: https://www.robotshop.com/en/lynxmoti...
More info about this project @ https://www.robotshop.com/community/f...
Each leg has 3x ST1 servos (Lynxmotion Smart Servos) and they are controlled by an Arduino Uno and a Lynxmotion LSS Adapter Board.
LSS ST1 servos: https://www.robotshop.com/en/lynxmoti...
LSS Adapter Board: https://www.robotshop.com/en/lynxmoti...
More info about this project @ https://www.robotshop.com/community/f...
4 سال پیش
در تاریخ 1399/02/27 منتشر شده
است.
5,388
بـار بازدید شده