Siteworks Setting up machine control mode SPS930

In this video, we will show you how to set up machine control mode on a Trimble SPS930 total station using Siteworks software.

To set up machine control mode, you will need to:

1. Connect the SPS930 to the Siteworks data collector.
2. Open the Siteworks software and select the "Machine Control" tab.
3. Select the type of machine you are using from the drop-down menu.
4. Enter the machine's dimensions and other relevant information.
5. Press the "Start" button to begin machine control mode.

Once machine control mode is started, the SPS930 will begin sending position and orientation data to the data collector. The data collector will then display the machine's position and orientation relative to the design in real time.

To use the SPS930 in machine control mode, you will need to create a project in Siteworks and import the design file. Once the design file is imported, you can start staking out points or grading the site.

Siteworks machine control mode is a powerful tool that can help you improve the productivity and accuracy of your construction projects.

Here are some additional tips for setting up and using Siteworks machine control mode:

* Make sure that the SPS930 is properly calibrated.
* Set up the SPS930 in a location where it has a clear view of the sky.
* Use a tripod to stabilize the SPS930.
* Enter the machine's dimensions and other relevant information accurately.
* Check the machine's position and orientation relative to the design regularly.

If you have any questions about setting up or using Siteworks machine control mode, please contact us https://sitech-im.com or leave  comment below.



*Keywords:* Trimble, Siteworks, machine control mode, SPS930, total station, construction, productivity, accuracy