DIY Boring Head Build | Made From Scratch
350.1 هزار بار بازدید -
3 سال پیش
-
G'day everyone,I have been wanting
G'day everyone,
I have been wanting to get my hands on a boring head ever since I bought the mill. These tools are vital in boring specific sized holes with the mill, and is a very useful mill tool to have on hand. However a quality boring bar is not an inexpensive tool, and even a budget import model will set you back over $100.
I had some off cuts of cold rolled steel from an old project laying around, so I decided to turn it into a DIY boring head, along with some brass scrap.
Making a boring head was surprisingly easy to do, however it does require a lot of set up and patience. I hope you enjoy the video.
Cheers
Mill: Sieg x2.7l mini mill
Lathe: Sieg c3 7x14 mini lathe
#machining #DIY #metalworking
I have been wanting to get my hands on a boring head ever since I bought the mill. These tools are vital in boring specific sized holes with the mill, and is a very useful mill tool to have on hand. However a quality boring bar is not an inexpensive tool, and even a budget import model will set you back over $100.
I had some off cuts of cold rolled steel from an old project laying around, so I decided to turn it into a DIY boring head, along with some brass scrap.
Making a boring head was surprisingly easy to do, however it does require a lot of set up and patience. I hope you enjoy the video.
Cheers
Mill: Sieg x2.7l mini mill
Lathe: Sieg c3 7x14 mini lathe
#machining #DIY #metalworking
3 سال پیش
در تاریخ 1400/08/01 منتشر شده
است.
350,167
بـار بازدید شده