I Had To Make a MASSIVE Tap Wrench. It's 270cm Long
260.5 هزار بار بازدید -
10 ماه پیش
-
G'day everyone,In this Video I
G'day everyone,
In this Video I will be making a huge tap wrench to hold my big 40mm taps that I made a few weeks ago. The shank on those taps measures out to be 30mm in diameter, which is too big for any of my current tap wrenches. Probably not too surprising.
Now I don't want to overthink this project, put it simply, I want to make a big tap wrench. I didn't have to do this, but I couldn't pass up the opportunity. The final result is a very strong tap wrench, and having used it I can say that it is very solid.
I will be making it from a piece of 25 x 75mm bar stock which I will turn between centers on the lathe and turn a thread for some handles.
I hope you enjoy the video.
#machining #diy #tapwrench
Making a Giant Tap Wrench
2.7M Long Tap Wrench
Massive Tap Wrench Build
DIY Tap Wrench
Timestamps
0:00 - Introduction
1:15 - Turning Down The Main Body
8:36 - Milling The Main Body
11:01 - Machining The Moving And Fixed Jaws
13:52 - Turning The Adjustment Screw
16:29 - Turning The Handles
20:18 - Final Assembly and Measurement
In this Video I will be making a huge tap wrench to hold my big 40mm taps that I made a few weeks ago. The shank on those taps measures out to be 30mm in diameter, which is too big for any of my current tap wrenches. Probably not too surprising.
Now I don't want to overthink this project, put it simply, I want to make a big tap wrench. I didn't have to do this, but I couldn't pass up the opportunity. The final result is a very strong tap wrench, and having used it I can say that it is very solid.
I will be making it from a piece of 25 x 75mm bar stock which I will turn between centers on the lathe and turn a thread for some handles.
I hope you enjoy the video.
#machining #diy #tapwrench
Making a Giant Tap Wrench
2.7M Long Tap Wrench
Massive Tap Wrench Build
DIY Tap Wrench
Timestamps
0:00 - Introduction
1:15 - Turning Down The Main Body
8:36 - Milling The Main Body
11:01 - Machining The Moving And Fixed Jaws
13:52 - Turning The Adjustment Screw
16:29 - Turning The Handles
20:18 - Final Assembly and Measurement
10 ماه پیش
در تاریخ 1402/06/25 منتشر شده
است.
260,567
بـار بازدید شده