MAKE THIS EASY USB HANDBRAKE | SIM RACING | DIY | E-BRAKE

Make this USB controlled handbrake for Drift, Rally and Racing simulator games. USB can be used in combination with any steering wheel Logitech G27 G29 G920, Thrust master or Fanatec This handbrake is designed to have a small foot print, be easy to setup and pack away when not in use. No modification is need to the original gaming unit when using the USB version of the Handbrake. There are 2 ways to wire the handbrake, direct to the gaming controller. Or using the PCB of a spare keyboard or interface. The PCB from the keyboard can be used to control many switches or buttons. Each keystroke can be mapped to control many in game features. There is a lot of information in this short video. Please ask any question about the design, build or parts used. Switch - https://ebay.us/BsoSxU Soldering Iron- BG https://goo.gl/Ahq8e2 Solder - BG https://goo.gl/Ni6n4P Wire eBay http://bit.ly/2J6PkgM Best soldering Iron https://ebay.us/fqH7JZ This site contains affiliate links for which I may be compensated Your comments or questions are all welcome. How to disassemble Wheel Base: https://www.seevid.ir/fa/w/nZtwlwZxVII Make a analog handbrake version here: https://www.seevid.ir/fa/w/kv0FTpRLFMY Enjoyed the content consider supporting here https://www.patreon.com/AMSTUDIO This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. https://creativecommons.org/licenses/by-nc-nd/4.0/

• #howto_style
• #diy
• #handbrake
• #ebrake
• #simulator
• #racing
• #assetto
• #dirt_rally
• #drift
• #g29
• #g27
• #g920
• #logitech
• #fanatec
• #thrustmaster
• #dirt
• #rally