Gridfinity Tips: 3D Printing Your New Workshop Organization System
296.9 هزار بار بازدید -
2 سال پیش
-
So it's been a few
So it's been a few months since the lovably bizarre YouTuber Zack Freedman of Voidstar Lab released his "Gridfinity" 3d printed workshop organization system, based on the 3d printed organizer ideas of Alexander Chappel. And I don't know about you, but given how much I LOVE organization tips, diy, and workshop organization, I have been hard at work gridfinitifying my entire life. And in this video, I wanna share with you some of the tips, tricks, and words of wisdom that I've come up with after hundreds of hours and kilos of 3d printer filament devoted to this lofty project.
🤫 Get behind the scenes and exclusive content on my Patreon: Patreon: thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction and about Gridfinity
00:29 Tip 0: Why Zach Freedman's System is Better
(I love both of you guys, I'm a huge fan, no disrespect, Alexander Chappel!)
02:57 Tip 1: Generating Custom Empty Gridfinity Boxes
04:59 Tip 2: Creating Custom Gridfinity Boxes to 3D Print
07:05 Tip 3A: 3D Printer Nozzle Sizes for Gridfinity
09:01 Tip 3B: Top and Bottom Layers for Gridfinity
09:54 Tip 4: 3D Printing your Gridfinity HOT
11:26 Tip 5: 3D Printer Filament for Gridfinity
14:07 Tip 6: Analysis Paralysis and Workshop organization tips
16:36 Tip 7: Size isn't everything (at least not in organization)
17:33 Bonus Tip: Gluing gridfinity grids into your own workshop drawers
18:13 Tip 8: 3D Printing one part at a time to start with
So there you have it, my top 3d printing tips for saving filament and time while organizing your workshop with gridfinity. If you enjoyed this video, and would like to see me create more 3d printing videos, diy videos, or just share my favorite 3d print ideas, please SUBSCRIBE and comment below to let me know!
RESOURCES & LINKS MENTIONED IN THE VIDEO:
🔗 Zach Freedman / Voidstar Lab Gridfinity video: https://www.google.com/url?q=https://...
🔗 Zach Freedman's follow-up video: h3D Print a Modular Toolbox, Soldering...
🔗 Alexander Chappel's video: https://www.google.com/url?q=https://...
🔗 Gridfinity Reddit: Reddit: gridfinity
🔗 Voidstar Lab Discord: Discord: discord
🔗 Gridfinity unofficial website: https://gridfinity.xyz
🔗 Filled in gridfinity boxes: https://www.printables.com/model/2105...
🔗 My Gridfinity Caliper Holder Design: https://www.printables.com/model/2606...
🔗 Gridfinity Openscad model: https://www.printables.com/model/1743...
🔗 Thomas Sanladerer video on 0.4mm nozzles (sorry, I can't pronounce your name, I tried) 0.4mm nozzles just became obsolete
🔗 Stefan at CNC Kitchen's wonderful research on temperature of 3d prints: Printing PLA at 265°C? How does print...
🔗 Stefan at CNC Kitchen's video on resuming 3D prints (must watch) HOW TO: Resume a failed 3D print!
SUPPORT THE CHANNEL BY USING THESE LINKS:
🔗 Overture Matte PLA (Highly recommended) https://geni.us/4Z4q2j [Amazon]
🔗 Overture Eco PLA Midnight Black (Only $17.99/k!) https://geni.us/UXqH [Amazon]
🔗 My preferred source for 3d printer nozzles: Prusa: https://s.click.aliexpress.com/e/_De2...
🔗 My preferred source for 3d printer nozzles: Creality: https://s.click.aliexpress.com/e/_Dk7...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: Patreon: thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
🤫 Get behind the scenes and exclusive content on my Patreon: Patreon: thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction and about Gridfinity
00:29 Tip 0: Why Zach Freedman's System is Better
(I love both of you guys, I'm a huge fan, no disrespect, Alexander Chappel!)
02:57 Tip 1: Generating Custom Empty Gridfinity Boxes
04:59 Tip 2: Creating Custom Gridfinity Boxes to 3D Print
07:05 Tip 3A: 3D Printer Nozzle Sizes for Gridfinity
09:01 Tip 3B: Top and Bottom Layers for Gridfinity
09:54 Tip 4: 3D Printing your Gridfinity HOT
11:26 Tip 5: 3D Printer Filament for Gridfinity
14:07 Tip 6: Analysis Paralysis and Workshop organization tips
16:36 Tip 7: Size isn't everything (at least not in organization)
17:33 Bonus Tip: Gluing gridfinity grids into your own workshop drawers
18:13 Tip 8: 3D Printing one part at a time to start with
So there you have it, my top 3d printing tips for saving filament and time while organizing your workshop with gridfinity. If you enjoyed this video, and would like to see me create more 3d printing videos, diy videos, or just share my favorite 3d print ideas, please SUBSCRIBE and comment below to let me know!
RESOURCES & LINKS MENTIONED IN THE VIDEO:
🔗 Zach Freedman / Voidstar Lab Gridfinity video: https://www.google.com/url?q=https://...
🔗 Zach Freedman's follow-up video: h3D Print a Modular Toolbox, Soldering...
🔗 Alexander Chappel's video: https://www.google.com/url?q=https://...
🔗 Gridfinity Reddit: Reddit: gridfinity
🔗 Voidstar Lab Discord: Discord: discord
🔗 Gridfinity unofficial website: https://gridfinity.xyz
🔗 Filled in gridfinity boxes: https://www.printables.com/model/2105...
🔗 My Gridfinity Caliper Holder Design: https://www.printables.com/model/2606...
🔗 Gridfinity Openscad model: https://www.printables.com/model/1743...
🔗 Thomas Sanladerer video on 0.4mm nozzles (sorry, I can't pronounce your name, I tried) 0.4mm nozzles just became obsolete
🔗 Stefan at CNC Kitchen's wonderful research on temperature of 3d prints: Printing PLA at 265°C? How does print...
🔗 Stefan at CNC Kitchen's video on resuming 3D prints (must watch) HOW TO: Resume a failed 3D print!
SUPPORT THE CHANNEL BY USING THESE LINKS:
🔗 Overture Matte PLA (Highly recommended) https://geni.us/4Z4q2j [Amazon]
🔗 Overture Eco PLA Midnight Black (Only $17.99/k!) https://geni.us/UXqH [Amazon]
🔗 My preferred source for 3d printer nozzles: Prusa: https://s.click.aliexpress.com/e/_De2...
🔗 My preferred source for 3d printer nozzles: Creality: https://s.click.aliexpress.com/e/_Dk7...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: Patreon: thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://kit.co/jlevi
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
2 سال پیش
در تاریخ 1401/06/08 منتشر شده
است.
296,903
بـار بازدید شده