9 TOP 3D Printed Organizers for Your Kitchen
31.1 هزار بار بازدید -
4 ماه پیش
-
In this video, I'm going
In this video, I'm going to show you around my kitchen, and share with you how I used 3D printing and a handful of 3d printed organizer systems to go from messy to organized. Brought to you by Sovol, check out the all-new Sovol SV08 at https://jle.vi/sv08 - it's only $499 for the first 800 buyers!
So, as you can probably relate to, this isn't the first time I've tried to get organized. But generally, whenever my wife or I "organize" a cabinet, especially one that everyone in the family uses, it usually takes about a week to become messy again.
So, as we go about this 3d printing challenge I'm going to try to apply these principles wherever I can:
First, a place for everything, and everything should only fit in it's place.
Second, accessibility and ergonomics over maximizing storage.
And finally, I'm going to placing a priority on efficiency, both in terms of print time, and in terms of material used. I'll specifically look for 3d printed organizer systems and 3d printing ideas that do less with more... which is NOT the case with most of my 3d printing challenges... ha!
I hope you get some great 3d printing ideas from this video, and that it helps you get a little order in your life!
🤫 Get behind the scenes and exclusive content on my Patreon: Patreon: thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:17 Background & Challenge Philosophy
02:21 Coffee & Tea
05:23 Bottles & Glassware
07:51 Utensils
11:50 Spice Drawer
13:54 Medicine Drawer
15:34 Countertop to Pantry
17:34 Fridge (Kinda)
19:49 Outstanding Challenges
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Black & White PLA from Sovol: https://jle.vi/sovol
👉 3D Gloop: https://jle.vi/gloop
🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳
🗿 Tea Bag Dispenser - Faster Stackable Interlocking by pwnate on Printables: https://www.printables.com/model/7056...
🗿 Bottle rack by bjamdesign on Printables: https://www.printables.com/model/7684...
🗿 Gridfinity Complete Kitchen Collection (w/ Modular Expansion Pieces) by Jonathan Levi on Printables: https://www.printables.com/model/7197...
🗿 Spice Drawer Organizer by PotatoPapi on Printables: https://www.printables.com/model/7729...
🗿 Medicine Drawer Organizer by Jonathan Levi on Printables: https://www.printables.com/model/8209...
🗿 Can/drink dispenser for NOCCO, pepsi, coke etc. by Calzune on Printables: https://www.printables.com/model/5405...
🗿 Red Bull Fridge Dispenser by NGC 6543 on Printables: https://www.printables.com/model/8174...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who's channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: Patreon: thenextlayer
🎁 Send a "Super Thanks" (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
So, as you can probably relate to, this isn't the first time I've tried to get organized. But generally, whenever my wife or I "organize" a cabinet, especially one that everyone in the family uses, it usually takes about a week to become messy again.
So, as we go about this 3d printing challenge I'm going to try to apply these principles wherever I can:
First, a place for everything, and everything should only fit in it's place.
Second, accessibility and ergonomics over maximizing storage.
And finally, I'm going to placing a priority on efficiency, both in terms of print time, and in terms of material used. I'll specifically look for 3d printed organizer systems and 3d printing ideas that do less with more... which is NOT the case with most of my 3d printing challenges... ha!
I hope you get some great 3d printing ideas from this video, and that it helps you get a little order in your life!
🤫 Get behind the scenes and exclusive content on my Patreon: Patreon: thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:17 Background & Challenge Philosophy
02:21 Coffee & Tea
05:23 Bottles & Glassware
07:51 Utensils
11:50 Spice Drawer
13:54 Medicine Drawer
15:34 Countertop to Pantry
17:34 Fridge (Kinda)
19:49 Outstanding Challenges
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Black & White PLA from Sovol: https://jle.vi/sovol
👉 3D Gloop: https://jle.vi/gloop
🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳
🗿 Tea Bag Dispenser - Faster Stackable Interlocking by pwnate on Printables: https://www.printables.com/model/7056...
🗿 Bottle rack by bjamdesign on Printables: https://www.printables.com/model/7684...
🗿 Gridfinity Complete Kitchen Collection (w/ Modular Expansion Pieces) by Jonathan Levi on Printables: https://www.printables.com/model/7197...
🗿 Spice Drawer Organizer by PotatoPapi on Printables: https://www.printables.com/model/7729...
🗿 Medicine Drawer Organizer by Jonathan Levi on Printables: https://www.printables.com/model/8209...
🗿 Can/drink dispenser for NOCCO, pepsi, coke etc. by Calzune on Printables: https://www.printables.com/model/5405...
🗿 Red Bull Fridge Dispenser by NGC 6543 on Printables: https://www.printables.com/model/8174...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who's channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: Patreon: thenextlayer
🎁 Send a "Super Thanks" (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
4 ماه پیش
در تاریخ 1403/02/07 منتشر شده
است.
31,108
بـار بازدید شده