Setting Up CAN Bus On Your 3D Printer (U2C & EBB)
88.5 هزار بار بازدید -
پارسال
-
Find out more about PCBWay's
Find out more about PCBWay's great services:
https://pcbway.com/g/A23h8V
Find out more or purchase an EBB board\U2C board here (AFF):
https://shrsl.com/3zcj6
Or here (AFF):
https://amzn.to/3Jr71pi
Love the channel? Consider supporting me on Patreon:
https://www.patreon.com/user?u=806627
ModBot Merch Store is now live! Get yours here:
https://bit.ly/3qhJ8Yl
Join the official ModBotArmy discord server: Discord: discord
CAN Bus is something I have wanted to dive into for almost a year now but for one reason or another always made an excuse. Well I finally sat down and it was way less straightforward than I had expected. This was primarily due to scattered instructions, different board revisions, and missing details. However, after coming out on the other side of it all I am super happy with it. I hope this video answers your questions and helps you along with your CAN Bus journey.
Resources:
Maz0r GitHub should be your first stop:
https://maz0r.github.io/klipper_canbu...
U2C reflashing file and instructions:
https://github.com/Esoterical/voron_c...
Bigtreetech Github:
https://github.com/bigtreetech?tab=re...
All Commands Used:
dfu-util -l
dfu-util -D ~/G0B1_U2C_V2.bin -a 0 -s 0x08000000:leave
sudo nano /etc/network/interfaces.d/can0
auto can0
iface can0 can static
bitrate 500000
up ifconfig $IFACE txqueuelen 1024
sudo reboot
ip -s link show can0
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
git clone https://github.com/Arksine/CanBoot
cd CanBoot
make menuconfig
make clean
make
lsusb
sudo dfu-util -a 0 -D ~/CanBoot/out/canboot.bin --dfuse-address 0x08000000:force:mass-erase:leave -d 0483:df11
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
cd klipper
make menuconfig
make clean
make
python3 ~/CanBoot/scripts/flash_can.py -i can0 -f ~/klipper/out/klipper.bin -u MYUUID
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: http://amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: Facebook: dopesoner930
Twitter: Twitter: dopesoner930
Instagram: Instagram: modbotarmy
Twitch: Twitch: dopesoner930
Time Stamps:
0:00 - Intro
1:07 - PCBWay
1:42 - Benefits Of Toolhead Boards
3:16 - A Brief On CAN Bus
3:49 - What Is Needed?
5:29 - Configuring CAN
11:15 - Wiring, Testing, And Flashing Over CAN
12:57 - Final Steps
12:57 - Final Steps
13:45 - Conclusion
Music provided by Argofox:
NEREUS - Lotus
NEREUS - Lotus [Argofox Release]
https://pcbway.com/g/A23h8V
Find out more or purchase an EBB board\U2C board here (AFF):
https://shrsl.com/3zcj6
Or here (AFF):
https://amzn.to/3Jr71pi
Love the channel? Consider supporting me on Patreon:
https://www.patreon.com/user?u=806627
ModBot Merch Store is now live! Get yours here:
https://bit.ly/3qhJ8Yl
Join the official ModBotArmy discord server: Discord: discord
CAN Bus is something I have wanted to dive into for almost a year now but for one reason or another always made an excuse. Well I finally sat down and it was way less straightforward than I had expected. This was primarily due to scattered instructions, different board revisions, and missing details. However, after coming out on the other side of it all I am super happy with it. I hope this video answers your questions and helps you along with your CAN Bus journey.
Resources:
Maz0r GitHub should be your first stop:
https://maz0r.github.io/klipper_canbu...
U2C reflashing file and instructions:
https://github.com/Esoterical/voron_c...
Bigtreetech Github:
https://github.com/bigtreetech?tab=re...
All Commands Used:
dfu-util -l
dfu-util -D ~/G0B1_U2C_V2.bin -a 0 -s 0x08000000:leave
sudo nano /etc/network/interfaces.d/can0
auto can0
iface can0 can static
bitrate 500000
up ifconfig $IFACE txqueuelen 1024
sudo reboot
ip -s link show can0
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
git clone https://github.com/Arksine/CanBoot
cd CanBoot
make menuconfig
make clean
make
lsusb
sudo dfu-util -a 0 -D ~/CanBoot/out/canboot.bin --dfuse-address 0x08000000:force:mass-erase:leave -d 0483:df11
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
cd klipper
make menuconfig
make clean
make
python3 ~/CanBoot/scripts/flash_can.py -i can0 -f ~/klipper/out/klipper.bin -u MYUUID
~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: http://amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: Facebook: dopesoner930
Twitter: Twitter: dopesoner930
Instagram: Instagram: modbotarmy
Twitch: Twitch: dopesoner930
Time Stamps:
0:00 - Intro
1:07 - PCBWay
1:42 - Benefits Of Toolhead Boards
3:16 - A Brief On CAN Bus
3:49 - What Is Needed?
5:29 - Configuring CAN
11:15 - Wiring, Testing, And Flashing Over CAN
12:57 - Final Steps
12:57 - Final Steps
13:45 - Conclusion
Music provided by Argofox:
NEREUS - Lotus
NEREUS - Lotus [Argofox Release]
پارسال
در تاریخ 1402/01/05 منتشر شده
است.
88,590
بـار بازدید شده