I Upgraded the Sovol SV08 Till It Broke

The Next Layer
The Next Layer
45.4 هزار بار بازدید - 3 ماه پیش - In this video, I share
In this video, I share how I "fixed" the Sovol SV08. Brought to you by Sovol. Check out the new Sovol SV08 at https://jle.vi/sv08

THIS is the Sovol SV08. It's Sovol's "continuation" of the Voron 2.4...

But unlike the Voron 2.4, it's designed to be mass-manufactured at scale and shipped almost entirely assembled. It also costs less than half as much as most Voron 2.4 kits.

But is it as easy to modify, customize, and upgrade as a Voron 2.4? Can I really install all of these cutting-edge upgrades, most of which literally aren't even on the market yet....? And will the printer actually work at the end of the video...? Or have I bitten off way more than I can chew.

Stick around till the end, and let's find out.

🤫 Get behind the scenes and exclusive content on my Patreon: Patreon: thenextlayer

💬 JOIN MY DISCORD: https://jle.vi/tnl-discord

🎥  IN THIS VIDEO:  🎥
00:00 Introduction
00:47 Background
03:25 Fan Noise
04:45 Touch Screen
07:39 Build Plate
08:48 Low Profile / Vibration Dampening Feet
10:03 Z-Drift & Firmware
12:16 Upgraded Hot End
16:12 Upgraded Toolhead Board
20:31 Eddy Coil Bed Sensor
25:35 Conclusion & Next Steps...

🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 Check out other Sovol printers and filament: https://jle.vi/sovol
👉 E3D: https://e3d-online.com/
👉 BIGTREETECH K-Touch: https://shrsl.com/4jol7
👉 WhamBam Flexible Build Plate: https://jle.vi/whambam
👉 E3D Revo: https://jle.vi/e3d
👉 V6 or V6 volcano compatible hot-end for the SV08 GitHub: https://github.com/Sovol3d/SV08
👉 E3D Revo Heatsink Adapter for the Sovol SV08 on PCBWay Project Marketplace: https://www.pcbway.com/project/sharep...
👉 BIGTREETECH EBB 36 and U2C Boards: https://shrsl.com/4joq5
👉 BIGTREETECH Eddy: https://shrsl.com/4joqn
👉 My previous video where I reviewed the Sovol SV08: The Sovol SV08: You Won't Believe the...
👉 My previous video where I build my 3D printer enclosure Build The ULTIMATE 3D Printer Enclosure
👉 Rav Meimad: https://en.ravmeimad.shop/
👉 Filamentech: https://www.filamentech.co.il/
👉 PolyMaker filament: https://jle.vi/polymaker
👉 PCBWay: https://jle.vi/pcbway
👉 Noctua fan on Amazon: https://geni.us/noctua60mmquietfan [Amazon]

🗳 STL FILES OF FEATURED 3D PRINTING MODELS: 🗳  
🗿 SOVOL SV08 Low Profile Vibration Isolation Feet! by 3DPrintDemon on Printables: https://www.printables.com/model/8673...
🗿 SV08 Foot pad by Synchro on Printables: https://www.printables.com/model/8788...


🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who's channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links


❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: Patreon: thenextlayer
🎁 Send a "Super Thanks" (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video


#3dprinting #3dprinted #3dprinter
3 ماه پیش در تاریخ 1403/03/04 منتشر شده است.
45,427 بـار بازدید شده
... بیشتر