How To Program A Chevrolet Traverse Remote Key Fob 2009 - 2010
149.6 هزار بار بازدید -
5 سال پیش
-
An easy to follow video
An easy to follow video on how to program a remote key fob for a 2009 - 2010 Chevrolet Traverse.
More free keyless entry programming instructions available at http://www.ProgramYourRemote.com/
This procedure is for vehicles WITH the Driver Information Center Buttons
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key. Test remote(s).
More free keyless entry programming instructions available at http://www.ProgramYourRemote.com/
This procedure is for vehicles WITH the Driver Information Center Buttons
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key. Test remote(s).
5 سال پیش
در تاریخ 1398/04/20 منتشر شده
است.
149,619
بـار بازدید شده