How to Build a Rotary Three Phase Converter with details & parts Urgent Read Description if Building

How to DIY a Three Phase Converter including the parts you need and information on how to connect the capacitor and relay. In the video when I am talking about the numbers on the potential relay. I mix up the numbers 2 and 5. It is wired correctly in the video, I just say the wrong numbers. If you are building this make sure that the number 2 on the relay goes to the motor and outlet this is where the third leg of power comes from. This is also the yellow wire in the video.  The number five on the relay just connects to the L1 leg of power. Which is the red wire in the video. You might also check out the part two video. I show It running and a couple of minor updates, a heavier start switch and how to break the wire going from the capacitor to the relay to keep it from back feeding.

• #people_blogs
• #three_phase_convertor