Building a Phase Converter - Part 1
242.7 هزار بار بازدید -
7 سال پیش
-
This is part one of
This is part one of a three video series on building a phase converter. This part is the heart of the subject. I will lay out the entire converter on a large sheet of plywood so you can easily see how I put things together. We will select the correct capacitors and test run the converter under load.
Part 2 and 3 will be about adding safety and convenience items, then mounting it all in an enclosure and wiring it up in the shop.
Dec2018 - I have had a couple of inquiries about the start capacitor: It is a 216-259mfd 330vac cap. ~P
Document I followed: http://www.practicalmachinist.com/Fit...
Midwest Surplus Electronics: http://www.midwestsurplus.net/
Song: Strange Things [Rewind Remix Release]
Music provided by Rewind Remix https://goo.gl/08ZthI
Artist: MOS3S
Part 2 and 3 will be about adding safety and convenience items, then mounting it all in an enclosure and wiring it up in the shop.
Dec2018 - I have had a couple of inquiries about the start capacitor: It is a 216-259mfd 330vac cap. ~P
Document I followed: http://www.practicalmachinist.com/Fit...
Midwest Surplus Electronics: http://www.midwestsurplus.net/
Song: Strange Things [Rewind Remix Release]
Music provided by Rewind Remix https://goo.gl/08ZthI
Artist: MOS3S
7 سال پیش
در تاریخ 1396/06/24 منتشر شده
است.
242,785
بـار بازدید شده