A13DTE - DPF Info in Torque
39.3 هزار بار بازدید -
7 سال پیش
-
Finally managed to find out
Finally managed to find out the PIDs that are related to the DPF information and added them manually in the application!
Some guys would tell if the car was performing a DPF regeneration by observing the temperature of the catalyst. Apart from than I have managed to read the following information regarding DPF.
1) Distance in km since last regeneration
2) Percentage (%) of DPF saturation level
3) Percentage (%)of completion of the Regeneration progress as it happens
4) Average km between DPF Regenerations
5) DPF Temperature (this was already available)
6) Distance in km since DPF change/replacement
The only way I could read these values (apart 5) was via the OpCom diagnostic tool. By adding manually the rest PIDs in Torque app, I can read the same values on my mobile phone in Torque application via a cheap ELM bluetooth adapter! :)
Here is an example that confirms the proper operation of the gauges in Torque while the car is doing a regeneration. Enjoy!
Some guys would tell if the car was performing a DPF regeneration by observing the temperature of the catalyst. Apart from than I have managed to read the following information regarding DPF.
1) Distance in km since last regeneration
2) Percentage (%) of DPF saturation level
3) Percentage (%)of completion of the Regeneration progress as it happens
4) Average km between DPF Regenerations
5) DPF Temperature (this was already available)
6) Distance in km since DPF change/replacement
The only way I could read these values (apart 5) was via the OpCom diagnostic tool. By adding manually the rest PIDs in Torque app, I can read the same values on my mobile phone in Torque application via a cheap ELM bluetooth adapter! :)
Here is an example that confirms the proper operation of the gauges in Torque while the car is doing a regeneration. Enjoy!
7 سال پیش
در تاریخ 1396/02/22 منتشر شده
است.
39,340
بـار بازدید شده