Things to Know When Installing Average Joe Stainless Steel Knurled Grips on Powerblock® Dumbbells
3.1 هزار بار بازدید -
2 سال پیش
-
Welcome to Average Joe's Exclusive
Welcome to Average Joe's Exclusive Shaky Cam Series with a few bits of information for fellow Powerblock owners who have begun to receive their brand new Average Joe 316 Stainless Steel Knurled Grip Kits.
This a not meant to be a full installation video. Earlier this year I made an installation video that covers the procedure in greater detail: How to Install Average Joe Stainless ...
Instead, in this video I show some of the key differences between the different grip types, and a few things to keep in mind during your installation.
0:38 Type A
3:20 Type B
6:20 Type C
If you have any questions, send an email to [email protected]
Cheers,
Joe
[CORRECTIONS:
At 3:40 I meant 4mm shoulder not 3mm.
And at 4:17 I meant foam rubber, not simply foam.
Next, at 5:20 I should have clarified that due to Powerblock manufacturing inconsistencies some USA Elite adder weight mechanisms may have play (may be loose) in the closed position as well. This is for the same reason mentioned in the video: lack of the OEM foam rubber resting against the mechanism. If your USA Elite adder weight mechanism is loose after upgrading to my grips, you will need to place a foam/rubber/plastic washer between the grip and metal plate. There are multiple ways to solve this. I will go over the various solutions in an upcoming video.
And, finally, at 8:05 when I refer to 4.5 and 5mm screws I am talking about the allen wrench size that you will need to remove them, not the bolt size. For example, the M6 (6mm) bolt uses a 5mm allen wrench.]
𝗙𝗢𝗥 𝗔𝗩𝗘𝗥𝗔𝗚𝗘 𝗝𝗢𝗘 𝗣𝗥𝗢𝗗𝗨𝗖𝗧 𝗜𝗡𝗙𝗢 𝗔𝗡𝗗 𝗣𝗥𝗜𝗖𝗜𝗡𝗚, 𝗩𝗜𝗦𝗜𝗧:
www.averagejoeinnovations.com
𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗡 𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠:
Instagram: average_joe_innovations_llc
𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗡 𝗙𝗔𝗖𝗘𝗕𝗢𝗢𝗞:
Facebook: AverageJoeInnovationsLLC
[𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥: The Powerblock® trademark is property of Powerblock, Inc. Powerblock had zero involvement with the development of AJI Grip Kits. They aren't affiliated with AJI in any way, and AJI product upgrades are in no way endorsed by Powerblock. Please keep in mind that aftermarket mods of any type will likely void your Powerblock warranty.]
This a not meant to be a full installation video. Earlier this year I made an installation video that covers the procedure in greater detail: How to Install Average Joe Stainless ...
Instead, in this video I show some of the key differences between the different grip types, and a few things to keep in mind during your installation.
0:38 Type A
3:20 Type B
6:20 Type C
If you have any questions, send an email to [email protected]
Cheers,
Joe
[CORRECTIONS:
At 3:40 I meant 4mm shoulder not 3mm.
And at 4:17 I meant foam rubber, not simply foam.
Next, at 5:20 I should have clarified that due to Powerblock manufacturing inconsistencies some USA Elite adder weight mechanisms may have play (may be loose) in the closed position as well. This is for the same reason mentioned in the video: lack of the OEM foam rubber resting against the mechanism. If your USA Elite adder weight mechanism is loose after upgrading to my grips, you will need to place a foam/rubber/plastic washer between the grip and metal plate. There are multiple ways to solve this. I will go over the various solutions in an upcoming video.
And, finally, at 8:05 when I refer to 4.5 and 5mm screws I am talking about the allen wrench size that you will need to remove them, not the bolt size. For example, the M6 (6mm) bolt uses a 5mm allen wrench.]
𝗙𝗢𝗥 𝗔𝗩𝗘𝗥𝗔𝗚𝗘 𝗝𝗢𝗘 𝗣𝗥𝗢𝗗𝗨𝗖𝗧 𝗜𝗡𝗙𝗢 𝗔𝗡𝗗 𝗣𝗥𝗜𝗖𝗜𝗡𝗚, 𝗩𝗜𝗦𝗜𝗧:
www.averagejoeinnovations.com
𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗡 𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠:
Instagram: average_joe_innovations_llc
𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗡 𝗙𝗔𝗖𝗘𝗕𝗢𝗢𝗞:
Facebook: AverageJoeInnovationsLLC
[𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥: The Powerblock® trademark is property of Powerblock, Inc. Powerblock had zero involvement with the development of AJI Grip Kits. They aren't affiliated with AJI in any way, and AJI product upgrades are in no way endorsed by Powerblock. Please keep in mind that aftermarket mods of any type will likely void your Powerblock warranty.]
2 سال پیش
در تاریخ 1401/08/25 منتشر شده
است.
3,121
بـار بازدید شده