Syntec 60W-E Adjust Tool Loading Position in Tool Magazine
4 هزار بار بازدید -
3 سال پیش
-
When changing the tool in
When changing the tool in the tool magazine, if found the tool loading position is slightly out, use the following instruction to correct the position.
For more details, email [email protected]
www.heliner.com
For more details, email [email protected]
www.heliner.com
3 سال پیش
در تاریخ 1400/04/26 منتشر شده
است.
4,066
بـار بازدید شده