How to use SYNTEC control system.
14 هزار بار بازدید -
6 سال پیش
-
a simple demo on how
a simple demo on how to use SYNTEC system (6MD, 6MB , 6MA)
disc type ATC router.
1, power on
2, home (X,Y,Z and tool magzine)
3, position rods, put on work piece
4. set work coordinates
4.1 set XY in offset setting
4.2 set Z
4.2.1 set tool length difference by using tool sensor
4.2.2 set work piece height
5 load file and start to work.
[email protected]
whatsapp/wechat: +86 15069012070
Skype: instantlx
6 سال پیش
در تاریخ 1397/04/19 منتشر شده
است.
14,025
بـار بازدید شده