Simple Multi Motor Setup for Newbies

Simple Multi Motor Setup for Newbies

In this video I will go over a very simple way to set up electronics for a multi motor electric RC model airplanes.  In short, a simple multi motor setup for newbies.

There are several way to set up a multi motor setup for an RC airplane using various combinations of electronic speed controls (ESC) and batteries.  To keep things simple I will use a two motor application with an ESC and lipo battery for each motor.  This is one trick where you must disconnect the battery eliminator circuit (BEC) from one of the ESC, and I will demonstrate how to easily do this.

I will also discuss the proper way to lengthen the battery wires.  See video below for a more detailed discussion of this for brushless electric motors.

I am in the process of designing a foam board RC model airplane for two engines.  This model will be the subject of a separate video.

Extend ESC wires video:

How to Extend ESC Wires Correctly

Here is a link to my YouTube Channel:
timmckay56

Many thanks in advance for a post of this video on Facebook, it truly helps the channel a lot!
Regards,
Tim

Chapters

00:00 - Intro
00:17 - Project overview
01:11 - Motor and ESC discussion
02:15 - BEC discussion
04:53 - Cutting the BEC wire
06:02 - Lengthen the wires
07:40 - One or two batteries and ESCs
08:55 - Mulit motor demonstration
09:56 - Twin engine RC model airplane
12:07 - Conclusion

• #education
• #simple_multi_motor_setup_for_newbies
• #lipo_battery_and_multi_motors
• #how_to_set_up_multi_electric_motors
• #how_to_set_up_twin_electric_motors
• #simple_rc_twin_engine_airplane
• #how_to
• #electrical_wiring
• #twin_motor_rc_plane
• #rc_plane_electric_motor
• #twin_motor_rc_plane_setup
• #multi_engine_rc_plane
• #how_to_make_a_rc_plane
• #twin_electric_motors
• #bec_and_electric_motors
• #diy_rc_plane_electronics
• #diy_electric_rc_plane
• #diy_twin_motor_rc_plane