How to Rewind a Brushless Motor for More Torque

Here is a video tutorial on how to get more torque out of a brushless outrunner motor by converting from a delta to wye phase termination. This will get you ~1.7 times more torque but 1.7 times less rpm. This tutorial should be applicable to most hobby outrunner motors. See links below for ones I recommend! The trickiest part is removing the stator from the housing. If people find it very difficult, comment and I will post another video on how to fully disassemble the motor. Thanks and enjoy!!

Here are some links for High Torque Brushless Motors and corresponding ESCs that I have used for my projects:
Turnigy SK3 5055 280Kv: https://amzn.to/3vDQK9c
Turnigy SK3 6364 245Kv: https://amzn.to/2ZnW05b
Turnigy SK3 6374 192Kv: https://amzn.to/3Ean72d
Flipsky 6374 140Kv: https://amzn.to/3EfptNE
Flipsky 50A ESC: https://amzn.to/30Na7kK
Generic 60A ESC: https://amzn.to/3pyBdXa

• #science_technology
• #rewind_brushless_motor
• #delta_to_wye_rewind
• #brushless_motors
• #bldc_motors
• #torque
• #kv_rating
• #motor_rpm
• #more_torque
• #brushless_motor_hack
• #hobbyking_motors
• #sk3_outrunner
• #how_to
• #diy
• #how_to_rewind
• #rc_motor
• #mit
• #hack
• #motor_torque