Disc Thickness Variation and Lateral Runout Discussion
30.3 هزار بار بازدید -
6 سال پیش
-
Visit our website for more
Visit our website for more resources geared towards technicians, DIYers and automobile enthusiasts: bit.ly/2pzelb
Many times, vehicles are brought into a shop with a complaint of pedal pulsation. Oftentimes, the cause of the pedal pulsation is diagnosed as a warped rotor. This diagnosis is wrong. In this video, we discuss the real cause of pulsating brakes.
Visit our Website: www.raybestos.com/
Like us on Facebook: www.facebook.com/RaybestosBrandBrakes/
Follow us on Twitter: www.twitter.com/RaybestosBrakes
Follow us on Instagram: www.instagram.com/raybestos_brand/
Follow us on LinkedIn: www.linkedin.com/showcase/raybestos-brake
What is Disc Thickness Variation?
The cause of pedal pulsation is disc thickness variation. Disc thickness variation happens when a rotor varies in thickness on its surface.
What causes a thickness variation to occur? The answer is excessive lateral runout. Lateral runout is the amount of side to side movement of the rotor as it rotates.
Today's vehicles have extremely tight lateral runout specifications. Most vehicles have a specification of two-thousandths of an inch or less. If the runout is excessive, the rotor will begin to make contact with the brake pads as it wobbles back and forth. This contact between the rotor and brake pads won't be constant. It will happen periodically as the rotor wobbles back and forth.
If you use a semi-metallic pad, the pads will begin to grind away on the spots of the rotor that it contacts. This happens because a semi-metallic pad has an abrasive effect on rotors. If you use a ceramic pad, the pads will leave a thin layer of friction material on the spots of the rotor that it contacts. This material transfer happens because ceramic pads have an adhesive effect on rotors.
Either way, this contact with the rotor is what causes a thickness variation. As the portion of the rotor with the thickness variation passes past the brake pads, the caliper piston has to extend or compress. This causes the pressure of the brake fluid to rise or fall during braking. This change of pressure is what leads to pedal pulsation.
What Causes Lateral Runout?
Lateral runout can be caused by uneven torque or a brake stud. However, the most common cause of lateral runout is rust buildup on the hub assembly.
Hubs are often in use on a vehicle for hundreds of thousands of miles. As you can imagine, a significant amount of rust will build up on that hub over that period of time. It is imperative that you take the time and clean the hub properly every time during a brake job. This will help ensure that you don't receive a comeback.
Steps to Checking Lateral Runout:
1.) Clean the hub
2.) Install the rotor and conical washers
3.) Torque lug nuts down to specifications: Specifications can be found in a specification guide or the vehicle's service manual.
4.) Install dial indicator
5.) Check lateral runout by turning the rotor: Specifications can be found in a specification guide or the vehicle's service manual.
Correcting Lateral Runout
There are a few options you can choose from to correct lateral runout.
The first option is to machine a rotor with a bench lathe or an on-the-care lathe. The other option is to replace the rotor with a new rotor.
No matter what option you choose, make sure that you re-measure the lateral runout and take the vehicle for a road test to ensure the pedal pulsation has stopped.
6 سال پیش
در تاریخ 1397/06/15 منتشر شده
است.
30,387
بـار بازدید شده