How to bleed Power Steering System the RIGHT WAY! Bleed Powersteering
902.7 هزار بار بازدید -
8 سال پیش
-
How to bleed Power Steering
How to bleed Power Steering System the RIGHT WAY! Bleed Powersteering
► Our Website for Tools, Parts and more Videos: http://mechaniclifestyle.com
In this video we are showing you how to bleed the power steering system on your vehicle. If you have replaced the power steering pump or a high pressure powersteering hose than you WILL HAVE TO bleed it or you are risking to damage your power steering pump.
If you start the car without bleeding the power steering system it will foam the powersteering fluid and it may creat air pockets that will make your pump to run dry and it could damage it.
If you hear a noise coming from the power steering pump after the repair than it means that there is still air in the system.
You will have to lift the front end of the vehicle up in the air so you can freely turn the steering wheel and not have pressure on the lines( do not start the car) until you bleed all the air out.
► 2ND Channel Subscribe: http://bit.ly/2a86p9Z
►►Honest Product Review Channel: http://bit.ly/2ygqUcy
► BMW E46 ZHP PROJECT http://bit.ly/2g8tOa9
► Ford Fiesta ST BUILD http://bit.ly/2a59UKp
► 2013 GT86 Project Playlist: http://bit.ly/2dz4xY1
► Social Media
Instagram: Instagram: worldmechanics
FACEBOOK PAGE: Facebook: worldmechanicsofficialpage
► SEND US STUFF?
WORLD MECHANICS
215 East Center
Alva, OK 73717
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.
► Our Website for Tools, Parts and more Videos: http://mechaniclifestyle.com
In this video we are showing you how to bleed the power steering system on your vehicle. If you have replaced the power steering pump or a high pressure powersteering hose than you WILL HAVE TO bleed it or you are risking to damage your power steering pump.
If you start the car without bleeding the power steering system it will foam the powersteering fluid and it may creat air pockets that will make your pump to run dry and it could damage it.
If you hear a noise coming from the power steering pump after the repair than it means that there is still air in the system.
You will have to lift the front end of the vehicle up in the air so you can freely turn the steering wheel and not have pressure on the lines( do not start the car) until you bleed all the air out.
► 2ND Channel Subscribe: http://bit.ly/2a86p9Z
►►Honest Product Review Channel: http://bit.ly/2ygqUcy
► BMW E46 ZHP PROJECT http://bit.ly/2g8tOa9
► Ford Fiesta ST BUILD http://bit.ly/2a59UKp
► 2013 GT86 Project Playlist: http://bit.ly/2dz4xY1
► Social Media
Instagram: Instagram: worldmechanics
FACEBOOK PAGE: Facebook: worldmechanicsofficialpage
► SEND US STUFF?
WORLD MECHANICS
215 East Center
Alva, OK 73717
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.
8 سال پیش
در تاریخ 1394/12/13 منتشر شده
است.
902,761
بـار بازدید شده