Return of the Vise Mod - 4x6 Bandsaw - Rob's Garage

This project is now up for grabs in a giveaway ending 31 October 2023 - Details here: (Closed) Channel Giveaway - Win My 4x...
This is 33 minutes of me re-making a vise-lock modification that I came up with for my 4x6 bandsaw a while back. It still took forever to do and several things went wrong, but I learned plenty and finally sorted out the parting issues. If I still have this part 2 months after posting this video, then I will think of some sort of channel giveaway.

Viewer Paul Birbeck has made a drawing of this gadget for use by anyone. Grab it here as a jpg: https://tinyurl.com/23wn2kqq

Both screws are M8 socket head. The long one has a 35mm thread, the short one is 25mm and this has the heat shrink ‘bushing’ on it. There are steel and nylon washers on each.

• #autos_vehicles
• #ducati
• #bevel
• #900ss
• #supersport
• #4x6_bandsaw
• #bandsaw_review
• #horizontal_bandsaw
• #bandsaw_improvements
• #best_bandsaw_mods
• #harbor_freight
• #toolshed
• #calibration
• #adjustment
• #blade_breaking_in
• #break_in_blade
• #best_mods
• #best_modifications
• #fixes
• #table_replacement
• #review
• #test
• #chip_tray
• #mini_lathe
• #beginner_lathe
• #mini_mail
• #beginner_mill
• #vice
• #bearing_adjustment
• #giveaway