Autocad Civil 3D: COGO Renumber, Как перенумеровать точки
5.3 هزار بار بازدید -
4 سال پیش
-
Use the Renumber command to
Use the Renumber command to assign new point numbers to selected drawing points_Right-click and click Renumber _SelectAndEditPointNumbers ; for the additive factor query, enter a number less than one from the smallest COGO point number (12193-12192=1). And then don't forget to assign new numbers of points in the point group that belong to this group
It may be interesting to see my work.
review of the apps:
- Auto level surveying calculations + Сollimation https://play.google.com/store/apps/de...
- Spreadsheet interpolation https://play.google.com/store/apps/de...
- Earthwork. Volume Measurement, altitude control over the base surface, adding Contour Lines, adding Direction Arrow with Slope Labels(Two-point) https://play.google.com/store/apps/de...
It may be interesting to see my work.
review of the apps:
- Auto level surveying calculations + Сollimation https://play.google.com/store/apps/de...
- Spreadsheet interpolation https://play.google.com/store/apps/de...
- Earthwork. Volume Measurement, altitude control over the base surface, adding Contour Lines, adding Direction Arrow with Slope Labels(Two-point) https://play.google.com/store/apps/de...
4 سال پیش
در تاریخ 1399/02/21 منتشر شده
است.
5,375
بـار بازدید شده