diy dump trailer using a hand winch and a pulley system
19.4 هزار بار بازدید -
9 سال پیش
-
The 5x8' trailer that this
The 5x8' trailer that this insert was built into has an overhead gantry system which I used to lift concrete staircases and objects under 1500lbs up and onto the trailer. I considered purchasing a dump trailer, however, I don't really need it year round - so I created this dump insert which is removable if necessary (however, I don't plan on removing it).
a-b-r-a-s-i-o-n - there all better (typo @ 2:38)
Cost:
$140 for welding service and some angle iron
approx $280 in other materials (rough guess-timate)
I could have used less expensive wood than redwood, but it's very light weight - weight is a consideration for this small setup and I haul it with an Isuzu Rodeo. Pressure treated 2x6's are heavy (and tend to warp).
shot with Sony A7r & a russian wide angle lens - microphone - RODE videomic pro
a-b-r-a-s-i-o-n - there all better (typo @ 2:38)
Cost:
$140 for welding service and some angle iron
approx $280 in other materials (rough guess-timate)
I could have used less expensive wood than redwood, but it's very light weight - weight is a consideration for this small setup and I haul it with an Isuzu Rodeo. Pressure treated 2x6's are heavy (and tend to warp).
shot with Sony A7r & a russian wide angle lens - microphone - RODE videomic pro
9 سال پیش
در تاریخ 1394/05/15 منتشر شده
است.
19,425
بـار بازدید شده