Tank and Vessel Metal Loss Repair: Fast and Easy with Belzona 1161
4.9 هزار بار بازدید -
پارسال
-
In this video we demonstrate
In this video we demonstrate how to repair metal loss on tanks and vessels using Belzona 1161 – 100% solids paste-grade epoxy, and Belzona 9341 – cross woven polyester reinforcing tape.
This system creates a reinforced composite patch that provides additional rigidity and strengthens the weakened wall defects.
A step-by-step how-to guide:
00:00 - Introduction
00:26 - Locating and marking the defect.
00:31 - Preparing the repair area for strong adhesion.
00:46 - Introducing Belzona 1161 for metal loss repair.
00:56 - Measuring and mixing Base and Solidifier.
01:08 - Ensuring uniform consistency in mixing.
01:18 - Cleaning the repair area thoroughly.
01:29 - Masking off the repair area.
01:33 - Applying a thin, well-bonded layer of the material.
01:55 - Wetting and applying reinforcement tape.
02:11 - Overlapping tape for durability.
02:36 - Smoothing out applied product and applying second layer of tape.
03:09 - Encapsulating the repair with additional Belzona 1161.
03:34 - Inspecting for completeness and proper application.
03:44 - Allowing proper curing time.
With these simple steps, you can extend the lifespan of your equipment and keep your operations running smoothly.
Always consult your Belzona representative to discuss alternative Belzona paste-grade materials fit for YOUR service conditions.
🔔 Subscribe and turn on notifications, so you don't miss any videos: https://www.youtube.com/belzona?sub_c...
👋GET IN TOUCH: https://www.belzona.com/en/contact.aspx
📖READ OUR LATEST BLOG: https://blog.belzona.com/
👍CONNECT WITH US: On LinkedIn - LinkedIn: belzona
📸 FOLLOW US: On Instagram - Instagram: belzonaglobal
This system creates a reinforced composite patch that provides additional rigidity and strengthens the weakened wall defects.
A step-by-step how-to guide:
00:00 - Introduction
00:26 - Locating and marking the defect.
00:31 - Preparing the repair area for strong adhesion.
00:46 - Introducing Belzona 1161 for metal loss repair.
00:56 - Measuring and mixing Base and Solidifier.
01:08 - Ensuring uniform consistency in mixing.
01:18 - Cleaning the repair area thoroughly.
01:29 - Masking off the repair area.
01:33 - Applying a thin, well-bonded layer of the material.
01:55 - Wetting and applying reinforcement tape.
02:11 - Overlapping tape for durability.
02:36 - Smoothing out applied product and applying second layer of tape.
03:09 - Encapsulating the repair with additional Belzona 1161.
03:34 - Inspecting for completeness and proper application.
03:44 - Allowing proper curing time.
With these simple steps, you can extend the lifespan of your equipment and keep your operations running smoothly.
Always consult your Belzona representative to discuss alternative Belzona paste-grade materials fit for YOUR service conditions.
🔔 Subscribe and turn on notifications, so you don't miss any videos: https://www.youtube.com/belzona?sub_c...
👋GET IN TOUCH: https://www.belzona.com/en/contact.aspx
📖READ OUR LATEST BLOG: https://blog.belzona.com/
👍CONNECT WITH US: On LinkedIn - LinkedIn: belzona
📸 FOLLOW US: On Instagram - Instagram: belzonaglobal
پارسال
در تاریخ 1402/03/24 منتشر شده
است.
4,999
بـار بازدید شده