Replacing the bulb in an Epson Home Cinema 3020 Projector
15 هزار بار بازدید -
4 سال پیش
-
This video demonstrates how I
This video demonstrates how I replaced the bulb on an Epson Home Cinema 3020 projector. I use and Osram replacement bulb. The upside is the bulb is brighter and the picture crisper than the original. The downside is the bulb runs hotter and the fan runs a bit more and louder than before. I would recommend using an original or Epson replacement.
I bought the replacement at www.jaspertronics.com.
Original Part Number: V12H010L68
Replacement Part Number: V13H010L68
• Remove the bulb hatch cover off the projector, one screw holding it.
• Undo the 2 screws holding the bulb and use the small spring loaded wire handle to remove the bulb.
• Installation is the reversal of removal.
Thanks for watching
I bought the replacement at www.jaspertronics.com.
Original Part Number: V12H010L68
Replacement Part Number: V13H010L68
• Remove the bulb hatch cover off the projector, one screw holding it.
• Undo the 2 screws holding the bulb and use the small spring loaded wire handle to remove the bulb.
• Installation is the reversal of removal.
Thanks for watching
4 سال پیش
در تاریخ 1399/04/25 منتشر شده
است.
15,066
بـار بازدید شده