Epson Light bulb replacement ( Home Cinema 2100 )
49.6 هزار بار بازدید -
4 سال پیش
-
whats up guys this instructions
whats up guys this instructions should work on many epson models ,
please let me know on the comments if this video helped you. thanks !
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.
4.Slide the lamp cover out and lift it off.
5.Loosen the screws securing the lamp to the projector. The screws do not come all the way out
6.Lift up the lamp handle and gently pull the lamp out of the projector.
7.Grasp the raised section of the lamp and gently pull the lamp out of the projector. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way.
8.Push in the lamp firmly and tighten the screws to secure it.
9.Replace the lamp cover and tighten the screw to secure it.
please let me know on the comments if this video helped you. thanks !
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.
4.Slide the lamp cover out and lift it off.
5.Loosen the screws securing the lamp to the projector. The screws do not come all the way out
6.Lift up the lamp handle and gently pull the lamp out of the projector.
7.Grasp the raised section of the lamp and gently pull the lamp out of the projector. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way.
8.Push in the lamp firmly and tighten the screws to secure it.
9.Replace the lamp cover and tighten the screw to secure it.
4 سال پیش
در تاریخ 1399/08/19 منتشر شده
است.
49,678
بـار بازدید شده