Volvo SPA platform - DPF soot regeneration Volvo XC60 D5/B5 (XC90, V90, S90, V60, XC40) 📱Car Scanner
2.9 هزار بار بازدید -
3 سال پیش
-
I observed DPF regeneration in
I observed DPF regeneration in Volvo XC60 B5 Diesel 2021 with Car Scanner ELM OBD2.
It was a short DPF regen, interrupted by the car at next red lights, pretty strange.
DPF regen: 0 = no regen, 1 = passive regen, 2 = active regeneration
Normalised trigger for PF regen % (soot content % in dpf filter)
PF = particle filter
DPF regen usually starts at Normalised PF trigger level 80-100 %
Usually when DPF regen starts (DPF regen=2), the Normalized PF trigger remains at 100% for 3-4 minutes then drops to 30-20%. In some cars it jumps again to higher value, regen is continued for 10-20 minutes.
UPDATE: you can see engine oil level (mm) in connection profile: Volvo SPA 4cyl. Wait at least 20 minutes after turning the engine off.
Car Scanner ELM OBD2 shows DPF soot in Volvo SPA/P5 platform: Volvo XC90 II 2014-, XC60 II, XC40, S90, V90, S60 III, V60 2018-. Useful when you get "DPF filter full", or "high oil level" warning.
Connection profile: SPA 4-cyl, but also try Volvo OBD/EOBD (different sensors), or SPA 3-cyl
Car Scanner ELM OBD2 app shows DPF soot in all Volvo cars (except V50/S40 4-cyl 1.6D and 2.0D)
In other brands Car Scanner shows Adblue level and NOx trap in most EUR6d 2018+ diesels. Select OBD/EOBD profile of your brand (Volvo, BMW, VW, Audi, Ford, Mercedes, etc) in Settings/Connection profile (or profile for your engine, if available)
Sensors:
- [ECM] Soot in the dust filter - probably GPF soot (gasoline particulate filter) ?
- DPF regen
- normalized trigger for PF regen % (DPF soot %)
- DEF Ad Blue (Diesel Additive Fluid - AdBlue)
- Reagent tank (AdBlue tank)
- NOx sensor
- NOx adsorber
AdBlue and NOx info comes handy if you get AdBlue warning, emergency turtle mode, or when to add Adblue fluid. In winter as AdBlue fluid solidifies at minus 11.5C and requires heating.
DEF is Diesel Exhaust Fluid (AdBlue - 32.5% urea and 67.5% water) for selective catalytic reduction (SCR) of nitrogen oxides (NOx) in diesel exhaust gases. AdBlue is dosed very often in small portions, whenever NOx level rises in NOx trap.
DEF parameters in Car Scanner ELM OBD2:
- AdBlue tank (litres)
- DEF concentration %
- AdBlue tank temperature (in winter AdBlue requires heating)
- NOx concentration
- DEF dosing %
- DEF consumption demanded vs actual, l/hour
- DEF usage in driving cycle
EURO6d cars - DPF regen and AdBlue
DPF regen in BMW G20 318d 2020 - Car ...
48V Mild hybrid cars - parameters in Car Scanner
mild-hybrid MHEV 48V driving video - ...
______
In Volvo SPA cars electronic modules go to sleep:
- after 15 minutes, when car doors are closed and locked
- after 30 minutes with door locks unlocked
- after 60 minutes with doors unlocked and car key left in the car
https://static.nhtsa.gov/odi/tsbs/201...
_______
Car Scanner ELM OBD2 app Android and iPhone (Car Scanner PRO full version is in-app purchase)
iCar2 Vgate adapter
https://play.google.com/store/apps/de...
https://apps.apple.com/app/car-scanne...
https://www.carscanner.info
Car Scanner ELM OBD2 app seems a good - but cheaper - alternative to Torque Pro, Carly, Carista, Autel, EOBD Facile, OBD Eleven, OBD Auto Doctor, TechApp, VAG DPF, Ross Tech VCDS and other apps. Car Scanner is universal app and can be used in hundreds of car brands (VW, TOYOTA, HYUNDAI, KIA, SKODA, VOLVO, RENAULT, NISSAN, MERCEDES and many more), unlike expensive apps for 1 car brand. Car Scanner works on iPhone and Android.
I have no affiliation with this app, I just use it a lot.
VOLVO XC40/C40 Pure Electric⚡(and Polestar 2) VOLVO XC40/C40/EX40 Pure Electric⚡(al...
Plug-in hybrid cars - parameters in Car Scanner Volvo plug-in hybrid XC60 T8/T6 SPA T...
______
My dashboard for EUR6d cars in Car Scanner PRO (OBD/EOBD profile):
https://www.udrop.com/5O07/dashboard....
https://www.udrop.com/file/5O08/xc60.jpg (XC60 background photo)
How to install dashboard:
1. Download dashboard.json file
2. Settings / My cars: create New car, select it
3. Settings / Connection profile, select OBD/EOBD profile of your car brand
4. Settings/ Dashboard / Restore Dashboard: select dashboard.json file
(you can use photo as in video, but say NO to question "set all items to transparent?)
Custom dashboard works with identical car profiles. Select Connection profile OBD/EOBD before restoring .json file as dashboard (Dashboard - restore Dashboard). This Dashboard was created for Volvo OBD/EOBD profile, but should work in all OBD/EOBD profiles. You can use dashboard with any other car profile, empty fields should be manually filled with sensors in your profile.
dashboard for Volvo P3 2008+ is now preloaded in the app.
_____
#Volvo
#AdBlue
#DPF
#SCR
00:00 Intro
00:10 Info
01:04 DPF regen
05:15 NOx charts
06:31 NOx
15:45 Turbo
_________
Airport Lounge - Disco Ultralounge by Kevin MacLeod, CCA 4.0 license.
http://incompetech.com/music/royalty-...
Accralate - The Dark Contenent by Kevin MacLeod, CC 4.0 license.
incompetech.com/music/royalty-free/index.html?isrc=USUAN1100341
incompetech.com/
It was a short DPF regen, interrupted by the car at next red lights, pretty strange.
DPF regen: 0 = no regen, 1 = passive regen, 2 = active regeneration
Normalised trigger for PF regen % (soot content % in dpf filter)
PF = particle filter
DPF regen usually starts at Normalised PF trigger level 80-100 %
Usually when DPF regen starts (DPF regen=2), the Normalized PF trigger remains at 100% for 3-4 minutes then drops to 30-20%. In some cars it jumps again to higher value, regen is continued for 10-20 minutes.
UPDATE: you can see engine oil level (mm) in connection profile: Volvo SPA 4cyl. Wait at least 20 minutes after turning the engine off.
Car Scanner ELM OBD2 shows DPF soot in Volvo SPA/P5 platform: Volvo XC90 II 2014-, XC60 II, XC40, S90, V90, S60 III, V60 2018-. Useful when you get "DPF filter full", or "high oil level" warning.
Connection profile: SPA 4-cyl, but also try Volvo OBD/EOBD (different sensors), or SPA 3-cyl
Car Scanner ELM OBD2 app shows DPF soot in all Volvo cars (except V50/S40 4-cyl 1.6D and 2.0D)
In other brands Car Scanner shows Adblue level and NOx trap in most EUR6d 2018+ diesels. Select OBD/EOBD profile of your brand (Volvo, BMW, VW, Audi, Ford, Mercedes, etc) in Settings/Connection profile (or profile for your engine, if available)
Sensors:
- [ECM] Soot in the dust filter - probably GPF soot (gasoline particulate filter) ?
- DPF regen
- normalized trigger for PF regen % (DPF soot %)
- DEF Ad Blue (Diesel Additive Fluid - AdBlue)
- Reagent tank (AdBlue tank)
- NOx sensor
- NOx adsorber
AdBlue and NOx info comes handy if you get AdBlue warning, emergency turtle mode, or when to add Adblue fluid. In winter as AdBlue fluid solidifies at minus 11.5C and requires heating.
DEF is Diesel Exhaust Fluid (AdBlue - 32.5% urea and 67.5% water) for selective catalytic reduction (SCR) of nitrogen oxides (NOx) in diesel exhaust gases. AdBlue is dosed very often in small portions, whenever NOx level rises in NOx trap.
DEF parameters in Car Scanner ELM OBD2:
- AdBlue tank (litres)
- DEF concentration %
- AdBlue tank temperature (in winter AdBlue requires heating)
- NOx concentration
- DEF dosing %
- DEF consumption demanded vs actual, l/hour
- DEF usage in driving cycle
EURO6d cars - DPF regen and AdBlue
DPF regen in BMW G20 318d 2020 - Car ...
48V Mild hybrid cars - parameters in Car Scanner
mild-hybrid MHEV 48V driving video - ...
______
In Volvo SPA cars electronic modules go to sleep:
- after 15 minutes, when car doors are closed and locked
- after 30 minutes with door locks unlocked
- after 60 minutes with doors unlocked and car key left in the car
https://static.nhtsa.gov/odi/tsbs/201...
_______
Car Scanner ELM OBD2 app Android and iPhone (Car Scanner PRO full version is in-app purchase)
iCar2 Vgate adapter
https://play.google.com/store/apps/de...
https://apps.apple.com/app/car-scanne...
https://www.carscanner.info
Car Scanner ELM OBD2 app seems a good - but cheaper - alternative to Torque Pro, Carly, Carista, Autel, EOBD Facile, OBD Eleven, OBD Auto Doctor, TechApp, VAG DPF, Ross Tech VCDS and other apps. Car Scanner is universal app and can be used in hundreds of car brands (VW, TOYOTA, HYUNDAI, KIA, SKODA, VOLVO, RENAULT, NISSAN, MERCEDES and many more), unlike expensive apps for 1 car brand. Car Scanner works on iPhone and Android.
I have no affiliation with this app, I just use it a lot.
VOLVO XC40/C40 Pure Electric⚡(and Polestar 2) VOLVO XC40/C40/EX40 Pure Electric⚡(al...
Plug-in hybrid cars - parameters in Car Scanner Volvo plug-in hybrid XC60 T8/T6 SPA T...
______
My dashboard for EUR6d cars in Car Scanner PRO (OBD/EOBD profile):
https://www.udrop.com/5O07/dashboard....
https://www.udrop.com/file/5O08/xc60.jpg (XC60 background photo)
How to install dashboard:
1. Download dashboard.json file
2. Settings / My cars: create New car, select it
3. Settings / Connection profile, select OBD/EOBD profile of your car brand
4. Settings/ Dashboard / Restore Dashboard: select dashboard.json file
(you can use photo as in video, but say NO to question "set all items to transparent?)
Custom dashboard works with identical car profiles. Select Connection profile OBD/EOBD before restoring .json file as dashboard (Dashboard - restore Dashboard). This Dashboard was created for Volvo OBD/EOBD profile, but should work in all OBD/EOBD profiles. You can use dashboard with any other car profile, empty fields should be manually filled with sensors in your profile.
dashboard for Volvo P3 2008+ is now preloaded in the app.
_____
#Volvo
#AdBlue
#DPF
#SCR
00:00 Intro
00:10 Info
01:04 DPF regen
05:15 NOx charts
06:31 NOx
15:45 Turbo
_________
Airport Lounge - Disco Ultralounge by Kevin MacLeod, CCA 4.0 license.
http://incompetech.com/music/royalty-...
Accralate - The Dark Contenent by Kevin MacLeod, CC 4.0 license.
incompetech.com/music/royalty-free/index.html?isrc=USUAN1100341
incompetech.com/
3 سال پیش
در تاریخ 1400/09/10 منتشر شده
است.
2,985
بـار بازدید شده