HOW TO REBUILD A SHARP MX-407FU1 FUSER UNIT | SAVE A TON OF MONEY DO IT YOURSELF
4.1 هزار بار بازدید -
4 سال پیش
-
In this video I tear
In this video I tear down and rebuild a sharp mx-407fu1 and show you how to rebuild it saving yourself a ton of money. A new unit cost is about 800.00 dollars to rebuild it only cost about 325-350 dollars plus your not paying the labor charge of 175.00 per hour.
parts needed
mx-607fb
mx-607lh
nbrgy0957fczz x2
rdtct0250fczz
affiliate links. If you use the links below I get a small commission to make future videos
click.dji.com/ANk7rcGfRB0qZ_x82YF0ZQ?pm=link
click.dji.com/APE0mH6WRQ5B3PV9yurPbA?pm=link
click.dji.com/AH6fchlP8AyKwSzIyCHStQ?pm=link
click.dji.com/AAunAiFYSjwxIzty-Jowog?pm=link
click.dji.com/ACKlUk4LqGViMGiQockj8Q?pm=link
click.dji.com/AJJA70Uf2CsR0Xzg77rC5Q?pm=link
click.dji.com/AC7jfHNxFmWHGRIuoSwKiw?pm=link
click.dji.com/AF9s5OC-zdMqg931F4GQRA?pm=link
click.dji.com/ABTGcOKQY9T5D_NbEFIcag?pm=link
click.dji.com/ALC4nsEGSSr8qmVx7le5_A?pm=link
4 سال پیش
در تاریخ 1399/04/19 منتشر شده
است.
4,164
بـار بازدید شده