Optoma HD 65 and optoma 3DXL 3D Projector Adapter install

Alan Hunter
Alan Hunter
15.7 هزار بار بازدید - - Though Id put together a
Though Id put together a bit of info on the 3DXl Projector adapter.
The firmware upgrade for my HD65 came out towards the end of December 2011 so I took the plunge and purchased the Adapter and the glasses from Tesco Direct .
First thing to do was download the free upgraded firmware for the projector which took around 10 mins from the very clear instructions on the Optoma web site.
http://www.optomaeurope.com/projector...
Price for the Adapter was £199 and an extra pair of glasses cost £59 also from Tesco.
Initially I had a lot of setup issues and this really prompted me to put this film together.
Main issue was red flaring on the screen coupled with blurring and signal loss on non 3d channels.
Eventually I came to realise that the cables were not up to scratch from my sources (PlayStation and Sky Hd box) and also found a thread that suggested lowering the output of the HD box to 720p in the Sky setup page.
So out to Maplins and got a 20m 1.4 HDMI cable (ouch ) for £60 and a .5m 1.4 hdmi cable for ( ouch ) £20 lowered the resolution to 720 and low and behold perfect operation and stunning 3d images.
and full switching between playstation / Blueray and Sky HD Box.
All in all a great upgrade which allows the viewing of 3d at a pretty good price .
Saved me investing in a new tv and gives me 75" 3d tv at one swoop.
Any questions give me a shout .
Sorry about the poor camera work at the end I wasnt paying enough attention.
55 سال پیش در تاریخ 1403/04/17 منتشر شده است.
15,766 بـار بازدید شده
... بیشتر