ProLux Tutorial: Handsender Easy/Trend auf Empfänger einlernen
7.6 هزار بار بازدید -
6 سال پیش
-
Teach-in the handheld transmitter to
Teach-in the handheld transmitter to the existing radio receiver:
0:02 Disconnect the power supply to the receiver so that it is de-energized (here, for example, by removing the central plug).
0:08 Remove the circuit board from the housing by unscrewing the two screws.
0:21 Press and hold the blue key for teach-in. Connect the power supply (here in the example the central plug) to the receiver. The green LED starts flashing and becomes faster after approx. 3 - 4 seconds. Then release the blue button.
0:34 Now press any three buttons on the handheld transmitter simultaneously within 15 seconds. The green LED on the receiver goes out.
0:41 Perform a test of the functions.
0:50 After a successful test, slide the circuit board into the receiver housing. Ensure that the circuit board is correctly seated in the guide rails. Screw the housing back together.
0:02 Disconnect the power supply to the receiver so that it is de-energized (here, for example, by removing the central plug).
0:08 Remove the circuit board from the housing by unscrewing the two screws.
0:21 Press and hold the blue key for teach-in. Connect the power supply (here in the example the central plug) to the receiver. The green LED starts flashing and becomes faster after approx. 3 - 4 seconds. Then release the blue button.
0:34 Now press any three buttons on the handheld transmitter simultaneously within 15 seconds. The green LED on the receiver goes out.
0:41 Perform a test of the functions.
0:50 After a successful test, slide the circuit board into the receiver housing. Ensure that the circuit board is correctly seated in the guide rails. Screw the housing back together.
6 سال پیش
در تاریخ 1396/12/22 منتشر شده
است.
7,627
بـار بازدید شده