ProLux Tutorial: Multi Fit Wheel richtig montieren
1.5 هزار بار بازدید -
2 سال پیش
-
Only install the ProLux Multi
Only install the ProLux Multi Fit Wheel to suitable vehicles. Additional information on this can be found in the
vehicle manufacturer’s operating instructions.
0:05 The allocation list shows vehicles that have already been approved. This list contains information on the use
of the correct adapters, required fitting of the wheel spacers and the matching wheel bolts.
0:18 Different wheel hub adapters for different bolt patterns are available depending on the version. The adapters are marked by means of a counterbore (1 - 6 marking points correspond to the identification number 1 - 6 of the llocation list).
0:20 Install the appropriate adapter corresponding to the allocation list. The matching bolt pattern is also indicated
in the allocation list.
0:26 If the original wheel bolts do not have a 60° tapered collar, the enclosed 60° tapered collar wheel bolts must
always be fitted.
0:32 Tighten the wheel bolts in a crosswise manner step by step and make sure that the adapter is centred.
The bolts must be tightened to the torque specified by the vehicle manufacturer and must engage in the hole by
at least 5 full turns.
0:39 After mounting the adapter, the ProLux Multi Fit Wheel can be installed. The ProLux Multi Fit Wheel is always fixed with the Multi-Fit wheel nuts.
vehicle manufacturer’s operating instructions.
0:05 The allocation list shows vehicles that have already been approved. This list contains information on the use
of the correct adapters, required fitting of the wheel spacers and the matching wheel bolts.
0:18 Different wheel hub adapters for different bolt patterns are available depending on the version. The adapters are marked by means of a counterbore (1 - 6 marking points correspond to the identification number 1 - 6 of the llocation list).
0:20 Install the appropriate adapter corresponding to the allocation list. The matching bolt pattern is also indicated
in the allocation list.
0:26 If the original wheel bolts do not have a 60° tapered collar, the enclosed 60° tapered collar wheel bolts must
always be fitted.
0:32 Tighten the wheel bolts in a crosswise manner step by step and make sure that the adapter is centred.
The bolts must be tightened to the torque specified by the vehicle manufacturer and must engage in the hole by
at least 5 full turns.
0:39 After mounting the adapter, the ProLux Multi Fit Wheel can be installed. The ProLux Multi Fit Wheel is always fixed with the Multi-Fit wheel nuts.
2 سال پیش
در تاریخ 1401/02/06 منتشر شده
است.
1,504
بـار بازدید شده