How To Replace Ignition Coil Pack 2006-2010 Ford Explorer
14.8 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Ignition Coil Pack
Buy Now!
New Ignition Coil Pack from 1AAuto.com http://1aau.to/id/1AECI00084
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. This video shows you how to install a new ignition coil pack in your 2006-2010 Ford Explorer.
• Check here for more videos on the 2006-2010 Ford Explorer Ford Explorer 2006-2010 4th Generation
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
Tools you will need:
• 7mm Socket http://1aau.to/odt/1AXAA00017
• Ratchet http://1aau.to/oeE/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oci/1AXAA00044
• Copper Anti-Seize
• Marker / Writing Utensil
• Painter's Tape
• Wire Brush http://1aau.to/oS/1AXAA00079
Subscribe: @trq
Check out our playlist:
Ford Explorer 2006-2010 4th Generation: Ford Explorer 2006-2010 4th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Ignition Coil Pack from 1AAuto.com http://1aau.to/id/1AECI00084
Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours. This video shows you how to install a new ignition coil pack in your 2006-2010 Ford Explorer.
• Check here for more videos on the 2006-2010 Ford Explorer Ford Explorer 2006-2010 4th Generation
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
Tools you will need:
• 7mm Socket http://1aau.to/odt/1AXAA00017
• Ratchet http://1aau.to/oeE/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oci/1AXAA00044
• Copper Anti-Seize
• Marker / Writing Utensil
• Painter's Tape
• Wire Brush http://1aau.to/oS/1AXAA00079
Subscribe: @trq
Check out our playlist:
Ford Explorer 2006-2010 4th Generation: Ford Explorer 2006-2010 4th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/09/30 منتشر شده
است.
14,877
بـار بازدید شده