How to Replace Front Rearward Lower Control Arm 2006-12 Ford Fusion
51.6 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASLF00512
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2006-12 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: Ford Fusion 2006-2012 1st Generation
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pry Bar http://1aau.to/oaL/1AXAA00020
• Trim Tool Set http://1aau.to/oa7/1AXXX00006
• Torque Wrench http://1aau.to/ob9/1AXAA00044
• Bungee Cord
• Liquid Thread Locker
• Hammer http://1aau.to/oaz/1AXAA00091
Subscribe: @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: Ford Fusion 2006-2012 1st Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASLF00512
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2006-12 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: Ford Fusion 2006-2012 1st Generation
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pry Bar http://1aau.to/oaL/1AXAA00020
• Trim Tool Set http://1aau.to/oa7/1AXXX00006
• Torque Wrench http://1aau.to/ob9/1AXAA00044
• Bungee Cord
• Liquid Thread Locker
• Hammer http://1aau.to/oaz/1AXAA00091
Subscribe: @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: Ford Fusion 2006-2012 1st Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/05/18 منتشر شده
است.
51,647
بـار بازدید شده